Kim Dong Min, Shin Myung Jun, Kim Sung Dong, Shin Yong Beom, Park Ho Eun, Kim Young Mo, Yoon Jin A
Department of Rehabilitation Medicine, Pusan National University School of Medicine-Biomedical Research Institute, Pusan National University Hospital, Busan, Korea.
Ann Rehabil Med. 2020 Oct;44(5):402-408. doi: 10.5535/arm.19210. Epub 2020 Sep 28.
To determine the patterns of tracheostomy cuff pressure changes with various air inflation amounts in different types of tracheostomy tubes to obtain basic data for appropriately managing long-term tracheostomy.
We performed tracheostomy on a 46-year-old male cadaver. Three types of tracheostomy tubes (single-cuffed, double-cuffed, and adjustable flange), divided into 8 different subtypes based on internal tube diameters and cuff diameters, were inserted into the cadaver. Air was inflated into the cuff, and starting with 1 mL air, the cuff pressure was subsequently measured using a manometer.
For the 7.5 mm/14 mm tracheostomy tube, cuff inflation with 3 mL of air yielded a cuff pressure within the recommended range of 20-30 cmH2O. The 7.5 mm/24 mm tracheostomy tube showed adequate cuff pressure at 5 mL of air inflation. Similar values were observed for the 8.0 mm/16 mm and 8.0 mm/27 mm tubes. Double-cuffed tracheostomy cuff pressures (7.5 mm/20 mm and 8.0 mm/20 mm tubes) at 3 mL air inflation had cuff pressures of 18-20 cmH2O at both the proximal and distal sites. For the adjustable flange tracheostomy tube, cuff pressure at 6 mL of cuff air inflation was within the recommended range. Maximal cuff pressure was achieved at inflation with almost 14 mL of air, unlike other tube types.
Various types of tracheostomy tubes showed different cuff pressures after inflation. These values might aid in developing guidelines For patients who undergo tracheostomy and are discharged home without cuff pressure manometers, this standard might be helpful to develop guidelines.
确定不同类型气管造口管在不同充气量下的气管造口管套囊压力变化模式,以获取适当管理长期气管造口术的基础数据。
我们对一名46岁男性尸体进行了气管造口术。将三种类型的气管造口管(单套囊、双套囊和可调凸缘),根据内管直径和套囊直径分为8种不同亚型,插入尸体中。向套囊内充气,从1 mL空气开始,随后使用压力计测量套囊压力。
对于7.5 mm/14 mm气管造口管,充入3 mL空气时套囊压力在推荐范围20 - 30 cmH₂O内。7.5 mm/24 mm气管造口管在充入5 mL空气时显示出足够的套囊压力。8.0 mm/16 mm和8.0 mm/27 mm的气管造口管也观察到类似的值。双套囊气管造口管(7.5 mm/20 mm和8.0 mm/20 mm气管造口管)在充入3 mL空气时,近端和远端部位的套囊压力均为18 - 20 cmH₂O。对于可调凸缘气管造口管,套囊充入6 mL空气时的套囊压力在推荐范围内。与其他类型的气管造口管不同,充入近14 mL空气时达到最大套囊压力。
不同类型的气管造口管充气后显示出不同的套囊压力。这些值可能有助于制定指导方针。对于接受气管造口术且出院回家时没有套囊压力计的患者,该标准可能有助于制定指导方针。