A framework for P-cycle assessment in wastewater treatment plants.

Phosphorus (P) in wastewater has a variety of negative effects and is usually permanently lost as a non-renewable resource. To mitigate future P shortage, P must be recovered from wastewater, preferably by bio-based technologies to avoid toxic side streams. A standardized procedure for the determination of P types and P concentrations in all liquid and solid process stages was established, which is applicable to all full-scale wastewater treatment plants (WWTPs). Based on this, an equally universal calculation framework for P-cycle assessment based on volume flow and mass load rates was designed to identify the most promising process streams for biological P recovery. As an example, in 16 process streams of a typical WWTP, concentrations of free, bound and total P were calculated and microbial communities were analyzed by flow cytometry over 748 days. The most promising process streams for the recovery of free P were anaerobic digester sludge, centrate and the water-extracts of the biosolids with 0.510 kg P m, 0.075 kg P m and 1.023 kg P m, while the best process streams for the recovery of bound P were return sludge, excess sludge, anaerobic digester sludge, and the solids of the biosolids with 0.300 kg P m, 0.268 kg P m, 0.213 kg P m and 1.336 kg P m, respectively. Microorganisms capable of P accumulation were active in all process stages and it was observed that chemical P precipitation antagonizes biological P removal. The framework for P-cycle assessment was able to identify process streams that are economically viable to make future in-stream technologies for biological P removal feasible.