Characterizing pore-scale structure-flow correlations in sedimentary rocks using magnetic resonance imaging.

Quantitative, three-dimensional (3D) spatially resolved magnetic resonance flow imaging (flow MRI) methods are presented to characterize structure-flow correlations in a 4-mm-diameter plug of Ketton limestone rock using undersampled k- and q-space data acquisition methods combined with compressed sensing (CS) data reconstruction techniques. The acquired MRI data are coregistered with an X-ray microcomputed tomography (μCT) image of the same rock sample, allowing direct correlation of the structural features of the rock with local fluid transport characteristics. First, 3D velocity maps acquired at 35 μm isotropic spatial resolution showed that the flow was highly heterogeneous, with ∼10% of the pores carrying more than 50% of the flow. Structure-flow correlations were found between the local flow velocities through pores and the size and topology (coordination number) associated with these pores. These data show consistent trends with analogous data acquired for flow through a packing of 4-mm-diameter spheres, which may be due to the microstructure of Ketton rock being a consolidation of approximately spherical grains. Using two-dimensional and 3D visualization of coregistered μCT images and velocity maps, complex pore-scale flow patterns were identified. Second, 3D spatially resolved propagators were acquired at 94 μm isotropic spatial resolution. Flow dispersion within the rock was examined by analyzing each of the 331 776 local propagators as a function of observation time. Again, the heterogeneity of flow within the rock was shown. Quantification of the mean and standard deviation of each of the local propagators showed enhanced mixing occurring within the pore space at longer observation times. These spatially resolved measurements also enable investigation of the length scale of a representative elementary volume. It is shown that for a 4-mm-diameter plug this length scale is not reached.