Xu Sifan, Zhao Tingting, Kong Lingwei, Zhu Wenhuan, Bo Maolin, Huang Yizhong, Liu Hai
Key Laboratory of Advanced Display and System Applications of Ministry of Education, Shanghai University, 149 Yanchang Road, Shanghai, 200072, People's Republic of China.
Department of Micro/Nano Electronics, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China.
Nanotechnology. 2021 May 10;32(31). doi: 10.1088/1361-6528/abfa55.
Nanostructured metal oxide semiconductors have received great attention used as the chemiresistive layer of gas sensor to detect the volatile organic compound recently. As indispensable complementary parts for dominative n-type semiconductors, the p-type metal oxides based gas sensors fail to be studied sufficiently, which hampers their practical applications. In this work, the p-type delafossite CuCrOnanoparticles were synthesized, characterized, and tested for gas sensing, followed by the first principles calculations to simulate the generation of chemiresistive signal. The hydrothermal synthesis time of CuCrOnanoparticles is optimized as 24 h with a higher proportion of oxygen vacancies but a smaller size, which is confirmed by the microscopy and spectrum characterization and allows for a prevailing gas sensitivity. Meanwhile, this CuCrOgas sensor is proven to perform a higher selectivity to n-propanol and a low detection limit of 1 ppm. The adsorption sites and charge variations of dehydrogenation at the gas-solid interface predicted by the theoretical analysis are claimed to be crucial to such selectivity. It is an innovative approach to understand the chemiresistive gas sensing by evaluating the preference of charge transfer between the sensor and target gaseous molecule, which provides a new route to precisely design and develop the advanced sensing devices for the diverse applications.
纳米结构金属氧化物半导体作为气体传感器的化学电阻层用于检测挥发性有机化合物,近年来受到了广泛关注。作为占主导地位的n型半导体不可或缺的互补部分,基于p型金属氧化物的气体传感器未能得到充分研究,这阻碍了它们的实际应用。在这项工作中,合成了p型铜铬矿CuCrO纳米颗粒,对其进行了表征和气体传感测试,随后进行了第一性原理计算以模拟化学电阻信号的产生。CuCrO纳米颗粒的水热合成时间优化为24小时,具有较高比例的氧空位但尺寸较小,这通过显微镜和光谱表征得到证实,并具有普遍的气体敏感性。同时,这种CuCrO气体传感器被证明对正丙醇具有更高的选择性,检测限低至1 ppm。理论分析预测的气固界面脱氢吸附位点和电荷变化被认为对这种选择性至关重要。通过评估传感器与目标气态分子之间电荷转移的偏好来理解化学电阻气体传感是一种创新方法,为精确设计和开发用于各种应用的先进传感装置提供了一条新途径。