Department of Orthopaedic Surgery, Graduate School of Medical Sciences, Nagoya City University, Nagoya, Japan.
Department of Orthopaedic Surgery, Tosei General Hospital, Aichi, Japan.
J Hand Surg Asian Pac Vol. 2021 Jun;26(2):194-206. doi: 10.1142/S2424835521500181.
The DePuy Synthes variable angle LCP Volar RIM Plate has been designed with its contour to overhang volar rim fragments of the distal radius to prevent secondary displacement after fracture fixation. Therefore, RIM potentially contributes to a risk of flexor tendon rupture due to its plate prominence over the watershed line. This is a retrospective cross-sectional study that aims at describing the occurrence of complications by utilizing RIM as well as three standards VLPs to evaluate the impact of plate design on flexor tendons. A total of 84 patients with a volar locking plate fixation were analyzed retrospectively (Far-distal; RIM: 14 cases, Juxta-articular; AcuLoc2 (ACUMED): 20 cases, Dual-Loc V7 (MEIRA): 25 cases, Extra-articular; VA-TCP (DePuy Synthes): 25 cases). Tendinous problems were evaluated with a reported adverse event and flexor tendon appearance examined by utilizing ultrasonography and direct observation during hardware removal. Plate prominence was graded according to Soong's classification and the distance to flexor tendons was measured to describe the risk that each plate damage the flexor tendons. The mean follow-up period was 13.0 months. All RIM plates were placed in grade 2 (85.7%) and grade 1 (14.3%). Symptomatic and asymptomatic tendinous problems were barely reported in RIM. The examination of ultrasonography and direct observation during hardware removal showed that tendons smoothly slid without attrition on the curved plate surface of RIM despite their adjacent appositions came from its high and distal plate prominence. Smooth profile of RIM showed an ability to decrease the potential risk of flexor tendon damage regardless of its prominence over the watershed line. RIM can be applied more to challenging far distal fractures when used judiciously and surgeons need to be even more vigilant for symptoms of tendon irritation as usually recommended without being coward more than necessary.
Depuy Synthes 可变角度 LCP 掌侧 RIM 钢板的设计轮廓使其覆盖桡骨远端掌侧边缘碎片,以防止骨折固定后的二次移位。因此,RIM 由于其在分水岭线上方的突出,有可能导致屈肌腱断裂的风险。这是一项回顾性的横断面研究,旨在描述使用 RIM 以及三种标准 VLPs 并发症的发生情况,以评估钢板设计对屈肌腱的影响。
共回顾性分析 84 例掌侧锁定钢板固定患者(远侧;RIM:14 例,关节旁;AcuLoc2(ACUMED):20 例,双Loc V7(MEIRA):25 例,关节外;VA-TCP(Depuy Synthes):25 例)。通过报告的不良事件评估肌腱问题,并通过超声检查和在去除内固定物时直接观察评估屈肌腱外观。根据 Soong 分类对钢板突出程度进行分级,并测量到屈肌腱的距离,以描述每种钢板损伤屈肌腱的风险。
平均随访时间为 13.0 个月。所有 RIM 钢板均置于 2 级(85.7%)和 1 级(14.3%)。在 RIM 中,仅报告了症状性和无症状性肌腱问题。在去除内固定物时的超声检查和直接观察显示,尽管 RIM 的高而远侧的钢板突出使肌腱与其相邻的附着物相邻,但肌腱仍在 RIM 的弯曲钢板表面上平稳滑动,没有磨损。
RIM 的平滑轮廓显示出降低屈肌腱损伤风险的能力,无论其在分水岭线上的突出程度如何。RIM 可以更谨慎地应用于更具挑战性的远侧骨折,并且外科医生需要更加警惕肌腱刺激的症状,通常建议无需过度警惕。