Jagerová Adéla, Mikšová Romana, Romanenko Oleksander, Plutnarova Iva, Sofer Zdeněk, Slepička Petr, Mistrík Jan, Macková Anna
Nuclear Physics Institute, Czech Academy of Sciences, v. v. i., 250 68 Řež, Czech Republic.
Department of Physics, Faculty of Science, J.E. Purkinje University, 400 96 Ústí nad Labem, Czech Republic.
Phys Chem Chem Phys. 2021 Oct 13;23(39):22673-22684. doi: 10.1039/d1cp02388h.
Self-assembled surface nanoscale structures on various ZnO facets are excellent templates for the deposition of semiconductor quantum dots and manipulation with surface optical transparency. In this work, we have modified the surface of -, - and -plane ZnO single-crystals by high-energy W-ion irradiation with an energy of 27 MeV to observe the aspects of surface morphology on the optical properties. We kept ion fluences in the range from 5 × 10 cm to 5 × 10 cm using the mode of single-ion implantation and the overlapping impact mode to see the effect of various regimes on surface modification. Rutherford backscattering spectroscopy in the channeling mode (RBS-C) and Raman spectroscopy have identified a slightly growing Zn-sublattice disorder in the irradiated samples with a more significant enhancement for the highest irradiation fluence. Simultaneously, the strong suppression of the main Raman modes and the propagation of the modes corresponding to polar Zn-O vibrations indicate disorder mainly in the O-sublattice in non-polar facets. The surface morphology, analysed by atomic force microscopy (AFM), shows significant changes after ion irradiation. The - and -plane ZnO exhibit the formation of small grains on the surface. The -plane ZnO forms a sponge-like surface for lower fluences and grains for the highest fluence. The surface roughness itself increases with the irradiation fluence as shown by AFM measurement as well as spectroscopic ellipsometry (SE) analysis. The damage caused by high-energy irradiation leads to non-radiative processes and suppression of the near-band-edge peak as well as the deep-level emission peak in the photoluminescence spectra. Furthermore, the refraction index and the extinction coefficient of irradiated samples, determined by SE, have features corresponding to the particular exciton states blurred and are slightly lower in the optical bandgap region especially for the polar -plane ZnO facet.
各种ZnO晶面上的自组装表面纳米级结构是用于沉积半导体量子点和控制表面光学透明度的优异模板。在这项工作中,我们用能量为27 MeV的高能W离子辐照对ZnO单晶的(0001)面、(1010)面和(1011)面进行了改性,以观察表面形貌对光学性质的影响。我们采用单离子注入模式和重叠撞击模式,将离子注量保持在5×10¹⁵ cm⁻²至5×10¹⁷ cm⁻²范围内,以研究不同条件对表面改性的影响。沟道模式卢瑟福背散射光谱(RBS-C)和拉曼光谱表明,辐照样品中的Zn亚晶格无序略有增加,在最高辐照注量下增强更为显著。同时,主要拉曼模式的强烈抑制以及与极性Zn-O振动对应的模式的传播表明,非极性晶面中的无序主要在O亚晶格中。通过原子力显微镜(AFM)分析的表面形貌显示,离子辐照后有显著变化。(0001)面和(1010)面的ZnO在表面形成小晶粒。(1011)面的ZnO在较低注量下形成海绵状表面,在最高注量下形成晶粒。如AFM测量和光谱椭偏仪(SE)分析所示,表面粗糙度本身随辐照注量增加。高能辐照造成的损伤导致非辐射过程以及光致发光光谱中近带边峰和深能级发射峰的抑制。此外,通过SE测定的辐照样品的折射率n和消光系数k具有与特定激子态模糊相对应的特征,并且在光学带隙区域略低,特别是对于极性(0001)面的ZnO晶面。