Yan Maximilian, Patwardhan Siddharth V
Department of Chemical and Biological Engineering, Green Nanomaterials Research Group, The University of Sheffield Mappin Street Sheffield S1 3JD UK
RSC Adv. 2021 Nov 1;11(56):35182-35186. doi: 10.1039/d1ra07212a. eCollection 2021 Oct 28.
The magnesiothermic reduction (MgTR) of silica has been recently shown to produce porous silicon which can be used in applications such as photocatalysis and energy storage. MgTR typically requires ≥650 °C to achieve meaningful conversions. However, high temperatures are detrimental to the highly desired porosity of silicon, while also raising doubts over the sustainability of the process. In this work we show for the first time that the onset temperature of the MgTR is dependent on the particle size of the feedstock silica. Using both in-house synthesised and commercial silica, we have shown that only particles ≤20 nm are able to trigger the reaction at temperatures as low as 380 °C, well below a previously reported cut-off temperature of 500 °C, producing porous, crystalline silicon. The decrease in temperature requirement from ≥650 °C to 380 °C achieved with little modification to the overall process, without any additional downstream processing, presents significant implications for sustainable and economical manufacturing of porous silicon.
最近研究表明,二氧化硅的镁热还原(MgTR)可生成多孔硅,可用于光催化和能量存储等应用。MgTR通常需要≥650°C才能实现可观的转化率。然而,高温对硅高度理想的孔隙率有害,同时也引发了对该工艺可持续性的质疑。在这项工作中,我们首次表明MgTR的起始温度取决于原料二氧化硅的粒径。使用内部合成的二氧化硅和市售二氧化硅,我们已经表明,只有≤20 nm的颗粒能够在低至380°C的温度下引发反应,远低于先前报道的500°C的截止温度,从而生成多孔晶体硅。在对整个工艺几乎没有改动且无需任何额外下游处理的情况下,温度要求从≥650°C降至380°C,这对多孔硅的可持续和经济制造具有重大意义。