Cao Zhijie, Ouyang Liuzhang, Felderhoff Michael, Zhu Min
School of Materials Science and Engineering, Key Laboratory of Advanced Energy Storage Materials of Guangdong Province, South China University of Technology Guangzhou 510641 PR China
Advanced Energy Storage Materials and Devices Laboratory, School of Physics and Electronic-Electrical Engineering, Ningxia University Yinchuan 750021 PR China.
RSC Adv. 2020 May 20;10(32):19027-19033. doi: 10.1039/d0ra02283g. eCollection 2020 May 14.
Ammonia borane (AB, NHBH) is considered as one of the most promising hydrogen storage materials for proton exchange membrane fuel cells due to its high theoretical hydrogen capacity under moderate temperatures. Unfortunately, its on-board application is hampered by the sluggish kinetics, volatile byproducts and harsh conditions for reversibility. In this work, AB and AlH were simultaneously infiltrated into a carbon nanotube array (CMK-5) to combine the synergistic effect of alane with nanoconfinement for improving the dehydrogenation properties of AB. Results showed that the transformation from AB to DADB started at room temperature, which promoted AB to release 9.4 wt% H within 10 min at a low temperature of 95 °C. Moreover, the entire suppression of all harmful byproducts was observed.
氨硼烷(AB,NHBH)因其在中等温度下具有较高的理论储氢容量,被认为是质子交换膜燃料电池最具潜力的储氢材料之一。不幸的是,其车载应用受到动力学缓慢、挥发性副产物以及苛刻的可逆条件的阻碍。在这项工作中,将AB和AlH同时渗透到碳纳米管阵列(CMK-5)中,以结合铝烷的协同效应与纳米限域作用来改善AB的脱氢性能。结果表明,从AB到二氨基二硼烷(DADB)的转变在室温下开始,这促使AB在95℃的低温下于10分钟内释放出9.4 wt%的氢。此外,还观察到所有有害副产物被完全抑制。