Department of Physics and Astronomy, University of Bologna, Viale Berti Pichat 6/2, 40127, Bologna, Italy.
Nat Commun. 2022 Sep 15;13(1):5423. doi: 10.1038/s41467-022-33094-2.
Research on electrolyte-gated and organic electrochemical transistor (OECT) architectures is motivated by the prospect of a highly biocompatible interface capable of amplifying bioelectronic signals at the site of detection. Despite many demonstrations in these directions, a quantitative model for OECTs as impedance biosensors is still lacking. We overcome this issue by introducing a model experiment where we simulate the detection of a single cell by the impedance sensing of a dielectric microparticle. The highly reproducible experiment allows us to study the impact of transistor geometry and operation conditions on device sensitivity. With the data we rationalize a mathematical model that provides clear guidelines for the optimization of OECTs as single cell sensors, and we verify the quantitative predictions in an in-vitro experiment. In the optimized geometry, the OECT-based impedance sensor allows to record single cell adhesion and detachment transients, showing a maximum gain of 20.2±0.9 dB with respect to a single electrode-based impedance sensor.
电解质门控和有机电化学晶体管(OECT)结构的研究受到具有高度生物相容性界面的前景的推动,该界面能够在检测部位放大生物电子信号。尽管在这些方向上已经有许多演示,但作为阻抗生物传感器的 OECT 仍然缺乏定量模型。我们通过引入一个模型实验来克服这个问题,该实验模拟了通过介电微球的阻抗感应来检测单个细胞。高度可重复的实验使我们能够研究晶体管几何形状和操作条件对器件灵敏度的影响。通过数据,我们合理化了一个数学模型,该模型为 OECT 作为单细胞传感器的优化提供了明确的指导方针,并在体外实验中验证了定量预测。在优化的几何形状中,基于 OECT 的阻抗传感器允许记录单个细胞的附着和脱附瞬变,与基于单个电极的阻抗传感器相比,其最大增益为 20.2±0.9 dB。