Pukaluk Anna, Wolinski Heimo, Viertler Christian, Regitnig Peter, Holzapfel Gerhard A, Sommer Gerhard
Institute of Biomechanics, Graz University of Technology, Austria.
Institute of Molecular Biosciences, University of Graz, Austria; Field of Excellence BioHealth, University of Graz, Austria.
Acta Biomater. 2023 Apr 15;161:154-169. doi: 10.1016/j.actbio.2023.02.027. Epub 2023 Feb 21.
Among the three layers of the aortic wall, the media is primarily responsible for its mechanical properties, but the adventitia prevents the aorta from overstretching and rupturing. The role of the adventitia is therefore crucial with regard to aortic wall failure, and understanding the load-induced changes in tissue microstructure is of high importance. Specifically, the focus of this study is on the changes in collagen and elastin microstructure in response to macroscopic equibiaxial loading applied to the aortic adventitia. To observe these changes, multi-photon microscopy imaging and biaxial extension tests were performed simultaneously. In particular, microscopy images were recorded at 0.02 stretch intervals. The microstructural changes of collagen fiber bundles and elastin fibers were quantified with the parameters of orientation, dispersion, diameter, and waviness. The results showed that the adventitial collagen was divided from one into two fiber families under equibiaxial loading conditions. The almost diagonal orientation of the adventitial collagen fiber bundles remained unchanged, but the dispersion was substantially reduced. No clear orientation of the adventitial elastin fibers was observed at any stretch level. The waviness of the adventitial collagen fiber bundles decreased under stretch, but the adventitial elastin fibers showed no change. These original findings highlight differences between the medial and adventitial layers and provide insight into the stretching process of the aortic wall. STATEMENT OF SIGNIFICANCE: To provide accurate and reliable material models, it is essential to understand the mechanical behavior of the material and its microstructure. Such understanding can be enhanced with tracking of the microstructural changes caused by mechanical loading of the tissue. This study provides therefore a unique dataset of structural parameters of the human aortic adventitia obtained under equibiaxial loading. The structural parameters describe orientation, dispersion, diameter, and waviness of collagen fiber bundles and elastin fibers. Eventually, the microstructural changes in the human aortic adventitia are compared with the microstructural changes in the human aortic media from a previous study. This comparison reveals the cutting-edge findings on the differences in the response to the loading between these two human aortic layers.
在主动脉壁的三层结构中,中膜主要决定其力学性能,但外膜可防止主动脉过度伸展和破裂。因此,外膜在主动脉壁衰竭方面的作用至关重要,了解组织微观结构中由负荷引起的变化具有重要意义。具体而言,本研究的重点是主动脉外膜在宏观双轴负荷作用下胶原和弹性蛋白微观结构的变化。为了观察这些变化,同时进行了多光子显微镜成像和双轴拉伸试验。特别是,以0.02的拉伸间隔记录显微镜图像。用取向、离散度、直径和波纹度参数对胶原纤维束和弹性蛋白纤维的微观结构变化进行了量化。结果表明,在双轴负荷条件下,外膜胶原分为两个纤维家族。外膜胶原纤维束几乎呈对角线的取向保持不变,但离散度显著降低。在任何拉伸水平下均未观察到外膜弹性蛋白纤维有明确的取向。拉伸时外膜胶原纤维束的波纹度降低,但外膜弹性蛋白纤维无变化。这些原始发现突出了中膜和外膜层之间的差异,并为主动脉壁的拉伸过程提供了见解。重要性声明:为了提供准确可靠的材料模型,了解材料的力学行为及其微观结构至关重要。通过跟踪组织机械负荷引起的微观结构变化可以增强这种理解。因此,本研究提供了在双轴负荷下获得的人主动脉外膜结构参数的独特数据集。这些结构参数描述了胶原纤维束和弹性蛋白纤维的取向、离散度、直径和波纹度。最终,将人主动脉外膜的微观结构变化与先前研究中的人主动脉中膜的微观结构变化进行了比较。这种比较揭示了这两个人主动脉层在负荷响应方面差异的前沿发现。