UofL Health, ULP Orthopedics, Louisville, Kentucky, USA.
University of Louisville School of Medicine, Louisville, Kentucky, USA.
Bone Joint J. 2023 Dec 1;105-B(12):1279-1285. doi: 10.1302/0301-620X.105B12.BJJ-2023-0670.R1.
The use of cementless total knee arthroplasty (TKA) components has increased during the past decade. The initial design of cementless metal-backed patellar components had shown high failure rates due to many factors. The aim of this study was to evaluate the clinical results of a second-generation cementless, metal-backed patellar component of a modern design.
This was a retrospective review of 707 primary TKAs in 590 patients from a single institution, using a cementless, metal-backed patellar component with a mean follow-up of 6.9 years (2 to 12). A total of 409 TKAs were performed in 338 females and 298 TKAs in 252 males. The mean age of the patients was 63 years (34 to 87) and their mean BMI was 34.3 kg/m (18.8 to 64.5). The patients were chosen to undergo a cementless procedure based on age and preoperative radiological and intraoperative bone quality. Outcome was assessed using the Knee Society knee and function scores and range of motion (ROM), complications, and revisions.
A total of 24 TKAs (3.4%) in 24 patients failed and required revision surgery, of which five were due to patellar complications (0.71%): one for aseptic patellar loosening (0.14%) and four for polyethylene dissociation (0.57%). A total of 19 revisions (2.7%) were undertaken in 19 patients for indications which did not relate to the patella: four for aseptic tibial loosening (0.57%), one for aseptic femoral loosening (0.14%), nine for periprosthetic infection (1.3%), one for popliteus impingement (0.14%), and four for instability (0.57%). Knee Society knee and function scores, and ROM, improved significantly when comparing pre- and postoperative values. Survival of the metal-backed patellar component for all-cause failure was 97.5% (95% confidence interval 94.9% to 100%) at 12 years.
The second-generation cementless TKA design of metal-backed patellar components showed a 97.5% survival at 12 years, with polyethylene dissociation from the metal-backing being the most common cause of patellar failure. In view of the increased use of TKA, especially in younger, more active, or obese patients, these findings are encouraging at mean follow-up of seven years.
在过去十年中,使用非骨水泥全膝关节置换术(TKA)组件的情况有所增加。最初设计的非骨水泥金属背衬髌骨组件由于多种因素导致高失败率。本研究的目的是评估一种新型设计的第二代非骨水泥、金属背衬髌骨组件的临床效果。
这是对单机构的 590 名患者的 707 例初次 TKA 的回顾性研究,使用非骨水泥、金属背衬髌骨组件,平均随访 6.9 年(2 至 12 年)。共有 409 例 TKA 患者为女性(338 例),298 例 TKA 患者为男性(252 例)。患者的平均年龄为 63 岁(34 至 87 岁),平均 BMI 为 34.3kg/m(18.8 至 64.5)。根据患者的年龄、术前影像学和术中骨质量,选择进行非骨水泥手术。使用膝关节学会膝关节和功能评分以及活动范围(ROM)、并发症和翻修来评估结果。
共有 24 例(3.4%)24 名患者的 24 例 TKA 失败并需要进行翻修手术,其中 5 例与髌骨并发症有关(0.71%):1 例为无菌性髌骨松动(0.14%),4 例为聚乙烯脱散(0.57%)。共有 19 例(2.7%)19 名患者因与髌骨无关的指征进行了 19 次翻修:4 例为无菌性胫骨松动(0.57%),1 例为无菌性股骨松动(0.14%),9 例为假体周围感染(1.3%),1 例为腘肌腱撞击(0.14%),4 例为不稳定(0.57%)。与术前相比,膝关节学会膝关节和功能评分以及 ROM 在术后均有显著改善。在 12 年时,金属背衬髌骨组件的全因失败的生存率为 97.5%(95%置信区间为 94.9%至 100%)。
第二代非骨水泥 TKA 设计的金属背衬髌骨组件在 12 年时的生存率为 97.5%,聚乙烯从金属背衬上脱散是髌骨失败的最常见原因。鉴于 TKA 的使用增加,特别是在年轻、更活跃或肥胖的患者中,这些发现令人鼓舞,平均随访七年。