Haviland Zachary K, Nong Daguan, Zexer Nerya, Tien Ming, Anderson Charles T, Hancock William O
Department of Biomedical Engineering, Pennsylvania State University, University Park, PA, USA.
Department of Biology, Pennsylvania State University, University Park, PA, USA.
Biotechnol Biofuels Bioprod. 2024 Jan 19;17(1):7. doi: 10.1186/s13068-023-02456-3.
Cellulose degradation by cellulases has been studied for decades due to the potential of using lignocellulosic biomass as a sustainable source of bioethanol. In plant cell walls, cellulose is bonded together and strengthened by the polyphenolic polymer, lignin. Because lignin is tightly linked to cellulose and is not digestible by cellulases, is thought to play a dominant role in limiting the efficient enzymatic degradation of plant biomass. Removal of lignin via pretreatments currently limits the cost-efficient production of ethanol from cellulose, motivating the need for a better understanding of how lignin inhibits cellulase-catalyzed degradation of lignocellulose. Work to date using bulk assays has suggested three possible inhibition mechanisms: lignin blocks access of the enzyme to cellulose, lignin impedes progress of the enzyme along cellulose, or lignin binds cellulases directly and acts as a sink.
We used single-molecule fluorescence microscopy to investigate the nanoscale dynamics of Cel7A from Trichoderma reesei, as it binds to and moves along purified bacterial cellulose in vitro. Lignified cellulose was generated by polymerizing coniferyl alcohol onto purified bacterial cellulose, and the degree of lignin incorporation into the cellulose meshwork was analyzed by optical and electron microscopy. We found that Cel7A preferentially bound to regions of cellulose where lignin was absent, and that in regions of high lignin density, Cel7A binding was inhibited. With increasing degrees of lignification, there was a decrease in the fraction of Cel7A that moved along cellulose rather than statically binding. Furthermore, with increasing lignification, the velocity of processive Cel7A movement decreased, as did the distance that individual Cel7A molecules moved during processive runs.
In an in vitro system that mimics lignified cellulose in plant cell walls, lignin did not act as a sink to sequester Cel7A and prevent it from interacting with cellulose. Instead, lignin both blocked access of Cel7A to cellulose and impeded the processive movement of Cel7A along cellulose. This work implies that strategies for improving biofuel production efficiency should target weakening interactions between lignin and cellulose surface, and further suggest that nonspecific adsorption of Cel7A to lignin is likely not a dominant mechanism of inhibition.
由于利用木质纤维素生物质作为可持续生物乙醇来源的潜力,纤维素酶对纤维素的降解已研究了数十年。在植物细胞壁中,纤维素通过多酚聚合物木质素结合在一起并得到强化。由于木质素与纤维素紧密相连且不能被纤维素酶消化,因此被认为在限制植物生物质的有效酶促降解中起主导作用。目前通过预处理去除木质素限制了从纤维素中高效生产乙醇的成本,这促使人们需要更好地了解木质素如何抑制纤维素酶催化的木质纤维素降解。迄今为止使用批量测定的研究提出了三种可能的抑制机制:木质素阻止酶接近纤维素、木质素阻碍酶沿着纤维素的进程,或者木质素直接结合纤维素酶并充当汇。
我们使用单分子荧光显微镜研究了里氏木霉的Cel7A在体外与纯化的细菌纤维素结合并沿其移动时的纳米级动力学。通过将松柏醇聚合到纯化的细菌纤维素上来生成木质化纤维素,并通过光学和电子显微镜分析木质素掺入纤维素网络的程度。我们发现Cel7A优先结合到没有木质素的纤维素区域,并且在木质素密度高的区域,Cel7A的结合受到抑制。随着木质化程度的增加,沿着纤维素移动而不是静态结合的Cel7A的比例降低。此外,随着木质化程度的增加,进行性Cel7A移动的速度降低,单个Cel7A分子在进行性运行期间移动的距离也降低。
在模拟植物细胞壁中木质化纤维素的体外系统中,木质素并未充当汇来隔离Cel7A并阻止其与纤维素相互作用。相反,木质素既阻止了Cel7A接近纤维素,又阻碍了Cel7A沿着纤维素的进行性移动。这项工作意味着提高生物燃料生产效率的策略应着眼于削弱木质素与纤维素表面之间的相互作用,并且进一步表明Cel7A对木质素的非特异性吸附可能不是主要的抑制机制。