Suppr超能文献

硅基上镓基纳米颗粒团簇的模板辅助生长:退火后处理对通过聚焦离子束纳米光刻制备的镓离子束曝光二维阵列的影响。

Template-assisted growth of Ga-based nanoparticle clusters on Si: effect of post-annealing process on the Ga ion beam exposed 2D arrays fabricated by focused ion beam nanolithography.

作者信息

Radhakrishnan Hrudya, Rangarajan Rajagopal, Pandian Ramanathaswamy, Dhara Sandip Kumar

机构信息

Surface and Sensors Studies Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, A CI of Homi Bhabha National Institute, Kalpakkam 603102, Tamilnadu, India.

Central University of Jharkhand, Ranchi, Jharkhand 835222, India.

出版信息

Nanotechnology. 2024 Jun 28;35(37). doi: 10.1088/1361-6528/ad5729.

Abstract

We demonstrate template-assisted growth of gallium-based nanoparticle clusters on silicon substrate using a focused ion beam (FIB) nanolithography technique. The nanolithography counterpart of the technique steers a focussed 30 kV accelerated gallium ion beam on the surface of Si to create template patterns of two-dimensional dot arrays. Growth of the nanoparticles is governed by two vital steps namely implantation of gallium into the substrate via gallium beam exposure and formation of the stable nanoparticles on the surface of the substrate by subsequent annealing at elevated temperature in ammonia atmosphere. The growth primarily depends on the dose of implanted gallium which is in the order of 10atoms per spot and it is also critically influenced by the temperature and duration of the post-annealing treatment. By controlling the growth parameters, it is possible to obtain one particle per spot and particle densities as high as 10particles per square centimetre could be achieved in this case. The demonstrated growth process, utilizing the advantages of FIB nanolithography, is categorized under the guided organization approach as it combines both the classical top-down and bottom-up approaches. Patterned growth of the particles could be utilized as templates or nucleation sites for the growth of an organized array of nanostructures or quantum dot structures.

摘要

我们展示了使用聚焦离子束(FIB)纳米光刻技术在硅衬底上实现镓基纳米颗粒团簇的模板辅助生长。该技术的纳米光刻对应方法是在硅表面引导一束聚焦的30 kV加速镓离子束,以创建二维点阵列的模板图案。纳米颗粒的生长由两个关键步骤控制,即通过镓束曝光将镓注入衬底,以及随后在氨气氛中高温退火,在衬底表面形成稳定的纳米颗粒。生长主要取决于注入镓的剂量,每个点的剂量约为10个原子,并且还受到退火后处理的温度和持续时间的严重影响。通过控制生长参数,有可能实现每个点一个颗粒,在这种情况下可以获得高达每平方厘米10个颗粒的颗粒密度。所展示的生长过程利用了FIB纳米光刻的优势,由于它结合了经典的自上而下和自下而上方法,因此被归类为引导组织方法。颗粒的图案化生长可作为纳米结构或量子点结构有组织阵列生长的模板或成核位点。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验