Suppr超能文献

基于聚苯胺/碳纳米管复合纳米纤维的无标记电化学多巴胺生物传感器。

Label-Free Electrochemical Dopamine Biosensor Based on Electrospun Nanofibers of Polyaniline/Carbon Nanotube Composites.

机构信息

Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.

出版信息

Biosensors (Basel). 2024 Jul 18;14(7):349. doi: 10.3390/bios14070349.

Abstract

The development of conducting polymer incorporated with carbon materials-based electrochemical biosensors has been intensively studied due to their excellent electrical, optical, thermal, physical and chemical properties. In this work, a label-free electrochemical dopamine (DA) biosensor based on polyaniline (PANI) and its aminated derivative, i.e., poly(3-aminobenzylamine) (PABA), composited with functionalized multi-walled carbon nanotubes (f-CNTs), was developed to utilize a conducting polymer as a transducing material. The electrospun nanofibers of the composites were fabricated on the surface of fluorine-doped tin oxide (FTO)-coated glass substrate under the optimized condition. The PANI/f-CNTs and PABA/f-CNTs electrospun nanofibers were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which confirmed the existence of f-CNTs in the composites. The electroactivity of the electrospun nanofibers was investigated in phosphate buffer saline solution using cyclic voltammetry (CV) before being employed for label-free electrochemical detection of DA using differential pulse voltammetry (DPV). The sensing performances including sensitivity, selectivity, stability, repeatability and reproducibility of the fabricated electrospun nanofiber films were also electrochemically evaluated. The electrochemical DA biosensor based on PANI/f-CNTs and PABA/f-CNTs electrospun nanofibers exhibited a sensitivity of 6.88 µA·cm·µM and 7.27 µA·cm·µM in the linear range of 50-500 nM (R = 0.98) with a limit of detection (LOD) of 0.0974 µM and 0.1554 µM, respectively. The obtained DA biosensor showed great stability, repeatability and reproducibility with precious selectivity under the common interferences, i.e., glucose, ascorbic acid and uric acid. Moreover, the developed electrochemical DA biosensor also showed the good reliability under detection of DA in artificial urine.

摘要

由于导电聚合物具有优异的电学、光学、热学、物理和化学性质,因此将其与碳材料结合制备电化学生物传感器的研究受到了广泛关注。本工作制备了一种基于聚苯胺(PANI)及其胺化衍生物聚(3-氨基苯甲胺)(PABA)的无标记电化学多巴胺(DA)生物传感器,该传感器由功能化多壁碳纳米管(f-CNTs)复合而成,利用导电聚合物作为信号转导材料。在优化条件下,将复合材料的电纺纳米纤维制备在掺氟氧化锡(FTO)涂层玻璃基底的表面上。采用衰减全反射傅里叶变换红外(ATR-FTIR)光谱、X 射线光电子能谱(XPS)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对 PANI/f-CNTs 和 PABA/f-CNTs 电纺纳米纤维进行了表征,证实了复合材料中存在 f-CNTs。在磷酸盐缓冲盐水溶液中,采用循环伏安法(CV)对电纺纳米纤维的电化学活性进行了研究,然后采用差分脉冲伏安法(DPV)对无标记电化学检测 DA 进行了研究。还对制备的电纺纳米纤维薄膜的传感性能(包括灵敏度、选择性、稳定性、重复性和重现性)进行了电化学评估。基于 PANI/f-CNTs 和 PABA/f-CNTs 电纺纳米纤维的电化学 DA 生物传感器在 50-500 nM 的线性范围内具有 6.88 µA·cm·µM 和 7.27 µA·cm·µM 的灵敏度(R = 0.98),检测限(LOD)分别为 0.0974 µM 和 0.1554 µM。在常见干扰物(如葡萄糖、抗坏血酸和尿酸)的存在下,该 DA 生物传感器表现出良好的稳定性、重复性和重现性,具有良好的选择性。此外,在人工尿液中检测 DA 时,所开发的电化学 DA 生物传感器也表现出良好的可靠性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/74e1/11275224/623a678646bf/biosensors-14-00349-sch001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验