Fluorspar to fluorochemicals upon low-temperature activation in water.

The dangerous chemical hydrogen fluoride sits at the apex of the fluorochemical industry, but the substantial hazards linked to its production under harsh conditions (above 300 degrees Celsius) and transport are typically contracted to specialists. All fluorochemicals for applications, including refrigeration, electric transportation, agrochemicals and pharmaceuticals, are prepared from fluorspar (CaF) through a procedure that generates highly dangerous hydrogen fluoride. Here we report a mild method to obtain fluorochemicals directly from fluorspar, bypassing the necessity to manufacture hydrogen fluoride. Acid-grade fluorspar (more than 97 per cent CaF) is treated with the fluorophilic Lewis acid boric acid (B(OH)) or silicon dioxide (SiO), in the presence of oxalic acid, a Brønsted acid that is highly effective for Ca sequestration. This scalable process carried out in water at low temperature (below 50 degrees Celsius) enables access to widely used fluorochemicals, including tetrafluoroboric acid, alkali metal fluorides, tetraalkylammonium fluorides and fluoro(hetero)arenes. The replacement of oxalic acid with sulfuric acid gave comparable results for B(OH), but was not as effective when the fluorophilic Lewis acid was SiO. A similar process also works with the lower-purity metspar. The production of fluorochemicals directly from fluorspar offers the possibility of decentralized manufacturing-an attractive model for the fluorochemical industry. With the renewed interest in innovative methods to synthesize oxalic acid via carbon dioxide capture and biomass, and the challenges posed by our dependence on fossil fuels for sulfur and therefore sulfuric acid supply, our technology may represent a departure towards a sustainable fluorochemical industry.