Tuncer Haticegul, Ege Hasan Volkan, Akgor Utku, Gultekin Murat, Tuncer Zafer Selcuk, Ozgul Nejat, Basaran Derman
Department of Obstetrics and Gynecology, Hacettepe University, Ankara, Turkey.
Division of Gynecologic Oncology, Department of Obstetrics and Gynecology, Hacettepe University, Ankara, Turkey.
Fertil Steril. 2025 May;123(5):907-909. doi: 10.1016/j.fertnstert.2025.01.011. Epub 2025 Jan 22.
To demonstrate the robotic-assisted Davydov technique for neovaginal creation in Mayer-Rokitansky-Küster-Hauser syndrome.
Stepwise demonstration of the technique with narrated video.
A 27-year-old patient has been diagnosed with Mayer-Rokitansky-Küster-Hauser syndrome since the age of 18 years. Three months ago, vaginal dilation was attempted at another medical center but was unsuccessful because of intolerance. Pelvic examination revealed a shallow vaginal dimple.
After identification of the anatomical structures, the rectovaginal and vesicovaginal spaces were dissected, creating a space for the neovaginal canal and forming anterior and posterior peritoneal flaps. After complete dissection of the rectum from the posterior pelvic peritoneum, the vaginal remnant was bluntly dissected externally under guidance of a blunt-tipped curette handle and connected adequately to the introitus. Subsequently, the created anterior and posterior flaps were individually interrupted with sutures to form the neovaginal entrance. After the neovaginal entrance was established, the robot was used again to continuously suture the uterine remnants to create the anterior neovaginal wall. The uterine remnants, rectal serosa, and internal portions of the flaps were then joined together to form the neovaginal vault.
Demonstration of the steps for the robotic management of neovaginal creation in Mayer-Rokitansky-Küster-Hauser syndrome.
The patient was discharged on postoperative day 1 with a soft mold in the vagina. On postoperative day 3, the soft mold was replaced with a medium-sized rigid mold. By postoperative day 6, the patient could insert a full-size rigid mold. The patient achieved full penetration and engaged in sexual activity within 1 month, with no postoperative complications observed. At the 8-month follow-up, the neovaginal cavity measured 13.4 cm in depth and 4.7 cm in diameter.
Creating a neovagina using the robotic-assisted Davydov technique in patients with Mayer-Rokitansky-Küster-Hauser syndrome is a safe, feasible, beneficial, and highly effective method. Although the superiority of robotic systems over laparoscopy has not yet been fully established through extensive publications, the advantages provided by high-image quality, magnification, and maneuverability are highlighted in this study. Robotic technology could be particularly beneficial for patients with obesity or those with complex pelvic anatomy because of prior surgeries.
展示机器人辅助的达维多夫技术用于迈耶-罗基坦斯基-库斯特-豪泽综合征患者的新阴道创建。
通过带旁白的视频逐步演示该技术。
一名27岁患者自18岁起被诊断为迈耶-罗基坦斯基-库斯特-豪泽综合征。三个月前,在另一家医疗中心尝试进行阴道扩张,但因不耐受而未成功。盆腔检查发现阴道有浅凹痕。
识别解剖结构后,解剖直肠阴道间隙和膀胱阴道间隙,为新阴道管创建空间并形成前后腹膜瓣。将直肠从盆腔后腹膜完全分离后,在钝头刮匙柄的引导下从外部钝性解剖阴道残端,并与阴道口充分连接。随后,将创建的前后瓣分别用缝线间断缝合以形成新阴道口。新阴道口建立后,再次使用机器人连续缝合子宫残端以创建新阴道前壁。然后将子宫残端、直肠浆膜和瓣的内部部分连接在一起形成新阴道穹窿。
展示迈耶-罗基坦斯基-库斯特-豪泽综合征患者机器人辅助新阴道创建的步骤。
患者术后第1天出院,阴道内放置软模具。术后第3天,将软模具更换为中型硬模具。术后第6天,患者能够插入全尺寸硬模具。患者在1个月内实现完全穿透并开始性行为,未观察到术后并发症。在8个月的随访中,新阴道腔深度为13.4厘米,直径为4.7厘米。
在迈耶-罗基坦斯基-库斯特-豪泽综合征患者中使用机器人辅助的达维多夫技术创建新阴道是一种安全、可行、有益且高效的方法。尽管机器人系统相对于腹腔镜的优越性尚未通过大量出版物完全确立,但本研究突出了高图像质量、放大倍数和可操作性所带来的优势。机器人技术对于肥胖患者或因既往手术导致盆腔解剖结构复杂的患者可能特别有益。