Schad L R, Blüml S, Debus J, Scharf J, Lorenz W J
Department of Radiology, German Cancer Research Center, Heidelberg.
Radiother Oncol. 1994 Oct;33(1):73-9. doi: 10.1016/0167-8140(94)90089-2.
In this methodological paper the authors report a fast, T1-weighted gradient-echo sequence (FLASH) for dynamic, Gd-DTPA-enhanced magnetic resonance (MR) imaging of meningiomas and its application in precision radiotherapy planning. Indications for radiotherapy included unresected tumors, tumor remaining after surgery, and recurrences. The patient's head was fixed in a stereotactic localization system which is usable at the CT, MR and the linear accelerator installations. By phantom measurements different materials (steel, aluminum, titanium, plastic, wood, ceramics) used for the stereotactic system were tested for mechanical stability and geometric MR image distortion. All metallic stereotactic rings (closed rings made of massive metal) led to a more or less dramatic geometric distortion and signal cancellation in the MR images. The best properties--nearly no distortion and high mechanic stability--are provided by a ceramic ring. If necessary, the remaining geometric MR image distortion can be 'corrected' (reducing displacements to the size of a pixel) by calculations based on modeling the distortion as a fourth order two-dimensional polynomial. The target volume was defined in dynamic, T1-weighted FLASH MR images, which were measured before, during, and after the controlled intravenous infusion of 0.1 mmol/kg body weight Gd-DTPA. The stereotactic localization technique allows the precise transfer of the target volume information from MR onto CT data to provide a map of the radiation attenuation coefficient for dose calculation. In genera, the superior soft tissue contrast of MR showed an excellent tumor delineation, especially in regions, such as the base of the skull, where the target often was obscured in CT images.(ABSTRACT TRUNCATED AT 250 WORDS)
在这篇方法学论文中,作者报告了一种快速的T1加权梯度回波序列(快速低角度激发序列),用于脑膜瘤的动态钆喷酸葡胺增强磁共振成像及其在精确放射治疗计划中的应用。放射治疗的适应症包括未切除的肿瘤、手术后残留的肿瘤以及复发肿瘤。患者头部固定在立体定向定位系统中,该系统可用于CT、磁共振成像和直线加速器设备。通过模体测量,对立体定向系统使用的不同材料(钢、铝、钛、塑料、木材、陶瓷)进行了机械稳定性和几何磁共振图像畸变测试。所有金属立体定向环(由块状金属制成的封闭环)在磁共振图像中或多或少都会导致明显的几何畸变和信号抵消。陶瓷环具有最佳性能——几乎无畸变且机械稳定性高。如有必要,可通过将畸变建模为四阶二维多项式进行计算,“校正”剩余的几何磁共振图像畸变(将位移减小到像素大小)。在静脉注射0.1 mmol/kg体重的钆喷酸葡胺的控制过程中,在注射前、注射期间和注射后测量的动态T1加权快速低角度激发序列磁共振图像中定义靶体积。立体定向定位技术可将靶体积信息从磁共振图像精确转移到CT数据上,以提供用于剂量计算的辐射衰减系数图。一般来说,磁共振成像卓越的软组织对比度能很好地勾勒出肿瘤轮廓,尤其是在颅骨底部等区域,在CT图像中靶区常常模糊不清。(摘要截短于250字)