Stankov-Jovanović Vesna P, Nikolić-Mandić Snezana D, Mandić Ljuba M, Mitić Violeta D
Faculty of Science, Department of Chemistry, University of Nis, Visegradska 33, Nis, Serbia.
Anal Bioanal Chem. 2006 Aug;385(8):1462-9. doi: 10.1007/s00216-006-0556-5. Epub 2006 Jun 28.
Pancuronium bromide (PCBr) inhibition effect on enzyme cholinesterase from pooled human serum (Che, EC 3.1.1.8 acylcholine acylhydrolase) was used for development of a spectrophotometric kinetic method for PCBr determination in human serum and urine. Optimal conditions for the basic and inhibitor reactions were established: pH=7.7 and substrate concentration c(benzoylcholine chloride)=1.33 mmol/L. Kinetic parameters were also determined: Michaelis-Menten's constant K(M)=0.40 mmol/L, maximal reaction rate V(max)=52.2 micromol/L min, inhibition constant K(i)=0,56 micromol/L and IC(50)=1.31 micromol/L. Linear dependence between the reaction rate and inhibitor concentration exists in PCBr concentration range 8.20-68.25 nmol/L, which corresponds to the real sample concentrations from 0.328 to 2.730 micromol/L. The method detection and quantification limits were 2.01 nmol/L and 6.67 nmol/L, respectively. Precision of the method was tested for three pancuronium concentrations (10.70, 29.35 and 51.25 nmol/L). Relative standard deviation (RSD) was in the range 0.15-7.45%. Accuracy was examined by standard addition method. Influence of the substances usually present in serum and urine on the reaction rate was tested. The developed method was applied for PCBr content determination in serum model samples, urine model samples and in urine taken during surgery. The method has good sensitivity, accuracy, precision and it is suitable for clinical practice.
泮库溴铵(PCBr)对人混合血清胆碱酯酶(Che,EC 3.1.1.8 酰基胆碱酰基水解酶)的抑制作用被用于开发一种分光光度动力学方法,用于测定人血清和尿液中的PCBr。确定了基本反应和抑制剂反应的最佳条件:pH = 7.7,底物浓度c(氯化苯甲酰胆碱)= 1.33 mmol/L。还测定了动力学参数:米氏常数K(M)=0.40 mmol/L,最大反应速率V(max)=52.2 μmol/L·min,抑制常数K(i)=0.56 μmol/L,半数抑制浓度IC(50)=1.31 μmol/L。在PCBr浓度范围8.20 - 68.25 nmol/L之间,反应速率与抑制剂浓度呈线性关系,这对应于实际样品浓度0.328至2.730 μmol/L。该方法的检测限和定量限分别为2.01 nmol/L和6.67 nmol/L。对三种泮库溴铵浓度(10.70、29.35和51.25 nmol/L)测试了该方法的精密度。相对标准偏差(RSD)在0.15 - 7.45%范围内。通过标准加入法检验了准确度。测试了血清和尿液中通常存在的物质对反应速率的影响。所开发的方法应用于血清模型样品、尿液模型样品以及手术期间采集的尿液中PCBr含量的测定。该方法具有良好的灵敏度、准确度、精密度,适用于临床实践。