Gupta Ashok Kumar, Kumar Amit, Singh Abhijeet, Subash Anand
Department of Otolaryngology Head and Neck Surgery, Postgraduate Institute of Medical Education and Research, 2nd Floor, Room No. 25 & 31, Faculty Offices D Block, Nehru Hospital, Chandigarh, India.
Indian J Otolaryngol Head Neck Surg. 2018 Sep;70(3):366-373. doi: 10.1007/s12070-018-1357-9. Epub 2018 Apr 19.
To evaluate the outcome and initial hurdles of transaxillary robotic thyroidectomy in the Indian subcontinent. A total of seven (n = 7) patients were operated from August 2016 to February 2017. Ultrasonography was used as a tool to decide the size of thyroid lobe and fine needle aspiration cytology for the type of lesion. All patients underwent ipsilateral brachial plexus nerve conduction studies preoperatively. Two arm positions were evaluated. The robot was docked at the contralateral side of the surgical field. Before discharge from hospital, all patients were given a questionnaire evaluate outcome. Set 1 was answered on the day of discharge and Set 2 at one-month follow up. The most common pathology in our case series was colloid goiter (n = 4) followed by follicular lesion (n = 3). The mean console time was 167 min, with initial two cases taking more than 200 min. The maximum and minimum length of the axillary tunnel was 16 and 27 cm respectively. There was no difference with regard to complication rate with either arm position. None of the patients developed brachial plexus injury and was confirmed by normal nerve conduction study done on postoperative day three. In our experience with transaxillary robotic thyroidectomy, the problems we faced in our population were unique considering the varied physical parameters. Use of malleable retractors comes handy in these situation and we recommend the use of these over the rigid ones. Though both the arm positions had similar outcomes, the one with sideways position was more favorable.
评估在印度次大陆进行经腋窝机器人甲状腺切除术的结果及初始障碍。2016年8月至2017年2月期间,共有7例患者接受了手术。超声检查被用作确定甲状腺叶大小的工具,细针穿刺细胞学检查用于确定病变类型。所有患者术前均接受同侧臂丛神经传导研究。评估了两种手臂位置。机器人停靠在手术区域的对侧。出院前,所有患者都收到一份问卷以评估结果。第一组问卷在出院当天回答,第二组在随访一个月时回答。我们病例系列中最常见的病理类型是胶样甲状腺肿(n = 4),其次是滤泡性病变(n = 3)。平均控制台操作时间为167分钟,最初两例手术时间超过200分钟。腋窝隧道的最大长度和最小长度分别为16厘米和27厘米。两种手臂位置的并发症发生率没有差异。没有患者发生臂丛神经损伤,术后第三天进行的正常神经传导研究证实了这一点。根据我们经腋窝机器人甲状腺切除术的经验,考虑到不同的身体参数,我们在患者群体中遇到的问题是独特的。在这种情况下,可弯曲牵开器很有用,我们建议使用可弯曲牵开器而非刚性牵开器。虽然两种手臂位置的结果相似,但侧向位置更有利。