Suppr超能文献

用于锥形束 CT 引导的 Histotripsy 准确性评估的含有造影剂的目标物。

A target containing phantom for accuracy assessment of cone-beam CT-guided histotripsy.

机构信息

Department of Radiology, University of Wisconsin-Madison, Madison, Wisconsin, USA.

Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin, USA.

出版信息

J Appl Clin Med Phys. 2024 May;25(5):e14329. doi: 10.1002/acm2.14329. Epub 2024 Mar 18.

Abstract

PURPOSE

Histotripsy is a nonionizing, noninvasive, and nonthermal focal tumor therapy. Cone-beam computed tomography (CBCT) guidance was developed for targeting tumors not visible on ultrasound. This approach assumes cavitation is formed at the geometrical focal point of the therapy transducer. In practice, the exact location might vary slightly between transducers. In this study, we present a phantom with an embedded target to evaluate CBCT-guided histotripsy accuracy and assess the completeness of treatments.

METHODS

Spherical (2.8 cm) targets with alternating layers of agar and radiopaque barium were embedded in larger phantoms with similar layers. The layer geometry was designed so that targets were visible on pre-treatment CBCT scans. The actual histotripsy treatment zone was visualized via the mixing of adjacent barium and agar layers in post-treatment CBCT images. CBCT-guided histotripsy treatments of the targets were performed in six phantoms. Offsets between planned and actual treatment zones were measured and used for calibration refinement. To measure targeting accuracy after calibration refinement, six additional phantoms were treated. In a separate investigation, two groups (N = 3) of phantoms were treated to assess visualization of incomplete treatments ("undertreatment" group: 2 cm treatment within 2.8 cm tumor, "mistarget" group: 2.8 cm treatment intentionally shifted laterally). Treatment zones were segmented (3D Slicer 5.0.3), and the centroid distance between the prescribed target and actual treatment zones was quantified.

RESULTS

In the calibration refinement group, a 2 mm offset in the direction of ultrasound propagation (Z) was measured. After calibration refinement, the centroid-to-centroid distance between prescribed and actual treatment volumes was 0.5 ± 0.2 mm. Average difference between the prescribed and measured treatment sizes in the incomplete treatment groups was 0.5 ± 0.7 mm. In the mistarget group, the distance between prescribed and measured shifts was 0.2 ± 0.1 mm.

CONCLUSION

The proposed prototype phantom allowed for accurate measurement of treatment size and location, and the CBCT visible target provided a simple way to detect misalignments for preliminary quality assurance of CBCT-guided histotripsy.

摘要

目的

声击穿是一种非电离、非侵入性和非热聚焦肿瘤治疗方法。锥形束计算机断层扫描(CBCT)引导技术是为了针对在超声下不可见的肿瘤而开发的。这种方法假设空化是在治疗换能器的几何焦点处形成的。在实践中,在不同的换能器之间,确切的位置可能会略有不同。在这项研究中,我们提出了一个带有嵌入式目标的体模,以评估 CBCT 引导的声击穿准确性,并评估治疗的完整性。

方法

将具有交替琼脂层和不透射线钡层的球形(2.8cm)目标嵌入具有类似层的较大体模中。层的几何形状设计使得目标在治疗前的 CBCT 扫描中可见。在治疗后的 CBCT 图像中,通过相邻钡和琼脂层的混合,可以观察到实际的声击穿治疗区。在六个体模中进行了 CBCT 引导的声击穿治疗。测量计划治疗区和实际治疗区之间的偏移量,并用于校准修正。为了在校准修正后测量靶向精度,对另外六个体模进行了治疗。在单独的研究中,对两组(N=3)体模进行了治疗,以评估不完全治疗的可视化情况(“治疗不足”组:2cm 治疗在 2.8cm 肿瘤内,“错靶”组:2.8cm 治疗有意侧向移位)。使用 3D Slicer 5.0.3 对治疗区进行分割,并量化规定目标与实际治疗区之间的质心距离。

结果

在校准修正组中,测量到在超声传播方向(Z 方向)上的 2mm 偏移。校准修正后,规定的和实际的治疗体积的质心到质心距离为 0.5±0.2mm。不完全治疗组中规定的和测量的治疗尺寸之间的平均差异为 0.5±0.7mm。在错靶组中,规定的和测量的移位之间的距离为 0.2±0.1mm。

结论

所提出的原型体模允许准确测量治疗区的大小和位置,而 CBCT 可见目标为初步的 CBCT 引导声击穿质量保证提供了一种简单的方法来检测对准偏差。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/1270/11087156/e60e1bf7d8b6/ACM2-25-e14329-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验