Suppr超能文献

Weil截骨术后背屈挛缩:尸体研究及三维分析结果

Dorsiflexion contracture after the Weil osteotomy: results of cadaver study and three-dimensional analysis.

作者信息

Trnka H J, Nyska M, Parks B G, Myerson M S

机构信息

Department of Orthopaedic Surgery, The Union Memorial Hospital, Baltimore, MD, USA.

出版信息

Foot Ankle Int. 2001 Jan;22(1):47-50. doi: 10.1177/107110070102200107.

Abstract

For metatarsalgia caused by a dislocated lesser metatarsophalangeal (MTP) joint and isolated over-long lesser metatarsals, surgical treatment options without sacrificing the joint are limited. Recently, the Weil osteotomy has been advocated for the treatment of this deformity. In our experience, preliminary results with this technique have revealed a high rate of dorsiflexion contracture of the MTP joints at follow-up. We performed a cadaver study and a three-dimensional analysis on sawbones to investigate this phenomenon. In the cadaveric portion of this study, the second MTP joints of two fresh-frozen cadavers were dissected; the entire ray, with the metatarsal shaft, MTP joint, toe, and plantar fascia, was removed en bloc. After gross anatomic structures were photographed, a Weil osteotomy was performed at 25 degrees relative to the long axis of the metatarsal shaft. The positions of muscles, ligaments, and tendons were noted and photographed before and after the osteotomy. In the sawbones portion of this study, a Weil osteotomy was performed at four different angles (25 degrees, 30 degrees, 35 degrees, and 40 degrees) relative to the long axis of the metatarsal. To ensure reproducibility, the sawbone models were fixed proximally to a vertical milling machine with the second metatarsals inclined 15 degrees to simulate the anatomic position. After making the cut, the plantar fragment was translated along the dorsal fragment proximally for a distance of 5 mm. Before and after the osteotomy, selected x, y, and z coordinates were obtained using a Microscribe 3D digitizer. Data analysis was performed with Microsoft Excel, and ANOVA was used to determine significant differences (p < 0.05) between the various osteotomies. Analysis of the cadaver dissection revealed that after the Weil osteotomy, the tendons of the interosseous muscles move dorsally with respect to the axis of the MTP joint due to the depression of the plantar fragment of the metatarsal. The loss of their flexion effect on the joint permits the pull of the extensor to dorsiflex the toe. The size of the depression for the various osteotomies averaged: 25 degrees osteotomy, 3.03 mm (range, 1.8 to 3.8 mm); 30 degrees osteotomy, 3.2 mm (range, 1.9 to 4.0 mm); 35 degrees osteotomy, 3.5 mm (range, 1.7 to 5.7 mm); and 40 degrees osteotomy, 4.2 mm (range, 2.8 to 6.4 mm). Amounts of shortening relative to the long axis of the metatarsal for the various osteotomies averaged: 25 degrees osteotomy, 5.03 mm (range, 4.77 to 5.30 mm); 30 degrees osteotomy, 4.59 mm (range, 3.47 to 5.19 mm); 35 degrees osteotomy, 4.27 mm (range, 2.87 to 5.00 mm); and 40 degrees osteotomy, 3.65 mm (range, 3.20 to 4.31 mm). According to our analysis, depression of the plantar fragment always occurs after a Weil osteotomy. This depression changes the center of rotation of the MTP joint, and the interosseous muscles then act more as dorsiflexors than as plantarfexors.

摘要

对于因小趾跖趾(MTP)关节脱位和孤立性小跖骨过长引起的跖痛症,不牺牲关节的手术治疗选择有限。最近,Weil截骨术被提倡用于治疗这种畸形。根据我们的经验,该技术的初步结果显示随访时MTP关节背屈挛缩率很高。我们进行了一项尸体研究,并对锯骨模型进行了三维分析以研究这一现象。在本研究的尸体部分,解剖了两具新鲜冷冻尸体的第二MTP关节;完整切除包括跖骨干、MTP关节、趾和足底筋膜的整个跖骨射线。在拍摄大体解剖结构后,相对于跖骨干的长轴以25度进行Weil截骨术。记录并拍摄截骨术前和术后肌肉、韧带和肌腱的位置。在本研究的锯骨部分,相对于跖骨的长轴以四个不同角度(25度、30度、35度和40度)进行Weil截骨术。为确保可重复性,将锯骨模型近端固定在垂直铣床上,使第二跖骨倾斜15度以模拟解剖位置。切割后,将跖侧骨块沿背侧骨块向近端平移5毫米。截骨术前和术后,使用Microscribe 3D数字化仪获取选定的x、y和z坐标。使用Microsoft Excel进行数据分析,并使用方差分析确定各种截骨术之间的显著差异(p < 0.05)。尸体解剖分析表明,Weil截骨术后,由于跖骨跖侧骨块的凹陷,骨间肌的肌腱相对于MTP关节的轴线向背侧移动。它们对关节的屈曲作用丧失,使得伸肌能够牵拉使趾背屈。各种截骨术的凹陷大小平均为:25度截骨术,3.03毫米(范围为1.8至3.8毫米);30度截骨术,3.2毫米(范围为1.9至4.0毫米);35度截骨术,3.5毫米(范围为1.7至5.7毫米);40度截骨术,4.2毫米(范围为2.8至6.4毫米)。各种截骨术相对于跖骨长轴的缩短量平均为:25度截骨术,5.03毫米(范围为4.77至5.30毫米);30度截骨术,4.59毫米(范围为3.47至5.19毫米);35度截骨术,4.27毫米(范围为2.87至5.00毫米);40度截骨术,3.65毫米(范围为3.20至4.31毫米)。根据我们的分析,Weil截骨术后跖侧骨块总是会出现凹陷。这种凹陷改变了MTP关节的旋转中心,然后骨间肌更多地起到背屈肌而非跖屈肌的作用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验