Zeng J, Bauer J, Zhang W, Sesterhenn I, Connelly R, Lynch J, Moul J, Mun S K
Imaging Science and Information Systems Center (ISIS), Department of Radiology, Georgetown University Medical Center, Washington, DC 2007, USA.
Comput Aided Surg. 2001;6(1):14-21. doi: 10.1002/igs.1006.
Systematic needle core biopsy is commonly used for the diagnosis of prostate cancer by urologists worldwide. As accurate and early diagnosis will result in more and better options for treatment, it is critical that the best possible protocols for biopsy be used clinically. In this study, we develop three-dimensional (3D) modeling and simulation technologies to evaluate most of the biopsy protocols in current clinical use, and correlate the results with those from clinical cases.
Using deformable modeling techniques, 3D computerized prostate surface models were reconstructed from step-sectioned, whole-mounted radical prostatectomy specimens with localized prostate cancer. A 3D computer simulation system was developed to accurately depict the anatomy of the prostate and all individual tumor foci. A user-friendly interface was developed in the system so that a physician can easily and interactively use it for prostate needle core biopsy. A total of 281 prostate models were reconstructed, and 18 biopsies were performed by a urologist on each model to determine the detection rates of seven different biopsy protocols. Clinical biopsies from 35 patient cases were also reviewed and correlated with the simulation results.
The most commonly used sextant biopsy had only a 71.5% detection rate, while rates for the 10-pattern and 12-pattern protocols were much higher (96.4% and 97.2%, respectively). Even the lateral 4-pattern protocol performed better than the sextant protocol, with a detection rate of 89.3%. The lateral sextant biopsy protocol (using sites similar to, but more lateral than, those in the sextant protocol) achieved a rate of 92.5%. Although the rate of the 14-pattern biopsy was a little higher (97.5%), it used four more biopsies to achieve this increase, which, according to McNemar's test, is not statistically significant when compared to results with the 10-pattern protocol. The 5-region protocol, which uses 12 biopsies, had a detection rate of 89.7%. Transition zone and seminal vesicle biopsies did not result in a significantly increased detection rate when added to the patterns above. The clinical correlation also confirmed that the 10-pattern protocol was significantly superior to the traditional sextant biopsy pattern.
The 10-pattern biopsy protocol was the most optimized among all the protocols evaluated. This protocol supplemented the sextant biopsy protocol with four more lateral biopsies in the mid and apical sites on both sides.
系统针芯活检是全球泌尿外科医生诊断前列腺癌常用的方法。由于准确和早期诊断将带来更多更好的治疗选择,临床上使用尽可能最佳的活检方案至关重要。在本研究中,我们开发三维(3D)建模和模拟技术以评估当前临床使用的大多数活检方案,并将结果与临床病例结果相关联。
使用可变形建模技术,从患有局限性前列腺癌的连续切片、整装前列腺根治性切除标本重建3D计算机前列腺表面模型。开发了一个3D计算机模拟系统以准确描绘前列腺和所有单个肿瘤病灶的解剖结构。在该系统中开发了一个用户友好界面,以便医生可以轻松且交互式地将其用于前列腺针芯活检。总共重建了281个前列腺模型,一名泌尿外科医生对每个模型进行18次活检以确定七种不同活检方案的检出率。还回顾了35例患者的临床活检并将其与模拟结果相关联。
最常用的六分区活检检出率仅为71.5%,而10点式和12点式方案的检出率要高得多(分别为96.4%和97.2%)。即使是外侧4点式方案也比六分区方案表现更好,检出率为89.3%。外侧六分区活检方案(使用与六分区方案类似但更靠外侧的部位)的检出率为92.5%。虽然14点式活检的检出率略高(97.5%),但它多进行了4次活检才实现这一提升,根据麦克尼马尔检验,与10点式方案的结果相比,这在统计学上不显著。使用12次活检的5区方案检出率为89.7%。当在上述方案基础上增加移行区和精囊活检时,检出率并未显著提高。临床相关性也证实10点式方案明显优于传统的六分区活检模式。
在所有评估的方案中,10点式活检方案是最优化的。该方案在六分区活检方案的基础上,在两侧的中部和尖部位置增加了4次更靠外侧的活检。