Fisher R K, How T V, Toonder I M, Hoedt M T, Brennan J A, Gilling-Smith G L, Harris P L
Department of Clinical Engineering, The Royal Liverpool University Hospital, UK.
Eur J Vasc Endovasc Surg. 2001 Jun;21(6):520-8. doi: 10.1053/ejvs.2001.1365.
Standardisation of cuff geometry by manufacturing prosthetic precuffed grafts (PCG) theoretically optimises haemodynamic forces. This study was designed in order to determine whether these beneficial flow patterns are replicated in vivo in PCG.
Flow visualisation and Doppler studies performed on anatomically accurate PCG models characterised in vitro anastomotic flow patterns. Thirty-two patients (median age 68 years) in whom autologous vein was unavailable, underwent bypass using PCG. Post-operative analysis included qualitative assessment of flow within the distal anastomosis using Doppler colour flow mapping. Cardiac gating techniques and assessment of velocity distribution were performed to gain additional information. These in vivo results were validated against the bench studies.
A cohesive vortex was identified within the distal anastomosis of in vitro models and had an integral relationship with the cardiac cycle. This flow structure was also characterised using Doppler colour flow mapping in both longitudinal and transverse planes, confirming the location of the vortex within the body and proximal part of the anastomosis. Twenty-two patients (69%) undergoing bypass with a PCG underwent successful Doppler assessment one week post-operatively, of whom 17 (77%) had a vortical flow structure identified at the distal anastomosis, similar to that characterised in vitro. Cardiac gating verified the same integral relationship of the vortex with the cardiac cycle as that described in vitro.
The geometric configuration of precuffed grafts induced vortices within the distal anastomoses in 17 out of 22 patients undergoing arterial reconstruction, thereby harnessing the haemodynamic forces that may suppress anastomotic hyperplasia and improve patency rates.
通过制造带预袖口的人工血管移植物(PCG)来实现袖口几何形状的标准化,理论上可优化血流动力学力。本研究旨在确定这些有益的血流模式在PCG的体内是否得以重现。
对具有解剖学精确性的PCG模型进行血流可视化和多普勒研究,以表征体外吻合口血流模式。32例(中位年龄68岁)无法使用自体静脉的患者接受了PCG旁路手术。术后分析包括使用多普勒彩色血流图对远端吻合口内的血流进行定性评估。采用心脏门控技术和速度分布评估以获取更多信息。这些体内结果与实验台研究结果进行了验证。
在体外模型的远端吻合口内识别出一个连贯的涡流,且其与心动周期具有整体关系。这种血流结构在纵向和横向平面上也通过多普勒彩色血流图进行了表征,证实了涡流在吻合口体内及近端部分的位置。22例(69%)接受PCG旁路手术的患者在术后一周成功进行了多普勒评估,其中17例(77%)在远端吻合口处识别出涡流结构,与体外表征的相似。心脏门控证实了涡流与心动周期的整体关系与体外描述的相同。
在22例接受动脉重建的患者中,有17例患者的带预袖口移植物的几何构型在远端吻合口内诱导出涡流,从而利用了可能抑制吻合口增生并提高通畅率的血流动力学力。