Yesilada O, Cing S, Asma D
Art and Science Faculty, Department of Biology, Inonu University, Malatya, Turkey.
Bioresour Technol. 2002 Jan;81(2):155-7. doi: 10.1016/s0960-8524(01)00117-1.
The effects of various conditions such as initial pH, dye concentrations, amount of pellet, temperature and agitation on decolourising activity of Funalia trogii were investigated. These, except initial pH, were all found to be important for dye decolourising activity of F. trogii. The decolourisation of the dye involved adsorption of the dye compound by fungal pellets at the initial stage, followed by the decolourisation through microbial metabolism. Heat-killed pellets were also tested for their ability to decolourise Astrazon Red dye. These pellets adsorbed the dye and 55% decolourisation was obtained in 24 h. But at the second cycle there was only 24% decolourisation. Our observation showed that Astrazon Red dye decolourisation by heat-killed pellets was mainly due to biosorption. The longevity of the decolourisation activity of F. trogii pellets was also investigated in repeated batch mode. Variations in the amount of pellet increased % decolourisation and stability of pellets.
研究了初始pH值、染料浓度、菌球量、温度和搅拌等各种条件对嗜热栖热放线菌脱色活性的影响。除初始pH值外,其他因素均被发现对嗜热栖热放线菌的染料脱色活性至关重要。染料的脱色过程包括在初始阶段真菌菌球对染料化合物的吸附,随后通过微生物代谢实现脱色。还测试了热灭活菌球对阿斯特拉宗红染料的脱色能力。这些菌球吸附了染料,在24小时内实现了55%的脱色。但在第二个循环中,脱色率仅为24%。我们的观察表明,热灭活菌球对阿斯特拉宗红染料的脱色主要是由于生物吸附。还以重复批次模式研究了嗜热栖热放线菌菌球脱色活性的持久性。菌球量的变化增加了脱色百分比和菌球的稳定性。