Hong Maochun, Cao Rong, Kawaguchi Hiroyuki, Tatsumi Kazuyuki
Research Center for Materials Science and the Department of Chemistry, Graduate School of Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8602, Japan.
Inorg Chem. 2002 Sep 9;41(18):4824-33. doi: 10.1021/ic025609a.
A series of group 6 transition metal half-sandwich complexes with 1,1-dichalcogenide ligands have been prepared by the reactions of CpMCl(4)(Cp = eta(5)-C(5)Me(5); M = Mo, W) with the potassium salt of 2,2-dicyanoethylene-1,1-dithiolate, (KS)(2)C=C(CN)(2) (K(2)-i-mnt), or the analogous seleno compound, (KSe)(2)C=C(CN)(2) (K(2)-i-mns). The reaction of CpMCl(4) with (KS)(2)C=C(CN)(2) in a 1:3 molar ratio in CH(3)CN gave rise to K[CpM(S(2)C=C(CN)(2))(2)] (M = Mo, 1a, 74%; M = W, 2a, 46%). Under the same conditions, the reaction of CpMoCl(4) with 3 equiv of (KSe)(2)C=C(CN)(2) afforded K[CpMo(Se(2)C=C(CN)(2))(2)] (3a) and K[CpMo(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))] (4) in respective yields of 45% and 25%. Cation exchange reactions of 1a, 2a, and 3a with Et(4)NBr resulted in isolation of (Et(4)N)[CpMo(S(2)C=C(CN)(2))(2)] (1b), (Et(4)N)[CpW(S(2)C=C(CN)(2))(2)] (2b), and (Et(4)N)[CpMo(Se(2)C=C(CN)(2))(2)] (3b), respectively. Complex 4 crystallized with one THF and one CH(3)CN molecule as a three-dimensional network structure. Inspection of the reaction of CpWCl(4) with (KSe)(2)C=C(CN)(2) by ESI-MS revealed the existence of three species in CH(3)CN, [CpW(Se(2)C=C(CN)(2))(2)]-, [CpW(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-, and [CpW(Se(Se(2))C=C(CN)(2))(2)]-, of which [CpW(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-(5) was isolated as the main product. Treatment of 2a with 1/4 equiv of S(8) in refluxing THF resulted in sulfur insertion and gave rise to KCp*W(S(2)C=C(CN)(2))(S(S(2))C=C(CN)(2)), which crystallized with two THF molecules forming a three-dimensional network structure. 6 can also be prepared by refluxing 2a with 1/4 equiv of S(8) in THF. 3a readily added one Se atom upon treatment with 1 mol of Se powder in THF to give 4 in high yield, while the treatment of 3a or 4 with 2 equiv of Na(2)Se in THF led to formation of a dinuclear complex [(CpMo)(2)(mu-Se)(mu-Se(Se(3))C=C(CN)(2))] (7). The structure of 7 consists of two CpMo units bridged by a Se(2-) and a Se(Se(3))C=C(CN)(2) ligand in which the triselenido group is arranged in a nearly linear way (163 degrees). The reaction of 2a with 2 equiv of CuBr in CH(3)CN yielded a trinuclear complex [CpWCu(2)(mu-Br)(mu(3)-S(2)C=C(CN)(2))(2)] (8), which crystallized with one CH(3)CN and generated a one-dimensional chain polymer through bonding of Cu to the N of the cyano groups.
通过CpMCl₄(Cp = η⁵-C₅Me₅;M = Mo,W)与2,2-二氰基乙烯-1,1-二硫醇盐的钾盐(KS)₂C=C(CN)₂(K₂-i-mnt)或类似的硒化合物(KSe)₂C=C(CN)₂(K₂-i-mns)反应,制备了一系列含1,1-二硫属化物配体的第6族过渡金属半夹心配合物。CpMCl₄与(KS)₂C=C(CN)₂在CH₃CN中以1:3的摩尔比反应,得到K[CpM(S₂C=C(CN)₂)₂](M = Mo,1a,产率74%;M = W,2a,产率46%)。在相同条件下,CpMoCl₄与3当量的(KSe)₂C=C(CN)₂反应,分别以45%和25%的产率得到K[CpMo(Se₂C=C(CN)₂)₂](3a)和K[CpMo(Se₂C=C(CN)₂)(Se(Se₂)C=C(CN)₂)](4)。1a、2a和3a与Et₄NBr的阳离子交换反应分别得到(Et₄N)[CpMo(S₂C=C(CN)₂)₂](1b)、(Et₄N)[CpW(S₂C=C(CN)₂)₂](2b)和(Et₄N)[CpMo(Se₂C=C(CN)₂)₂](3b)。配合物4以一个THF和一个CH₃CN分子结晶,形成三维网络结构。通过电喷雾电离质谱(ESI-MS)对CpWCl₄与(KSe)₂C=C(CN)₂反应的研究表明,在CH₃CN中存在三种物种,[CpW(Se₂C=C(CN)₂)₂]⁻、[CpW(Se₂C=C(CN)₂)(Se(Se₂)C=C(CN)₂)]⁻和[CpW(Se(Se₂)C=C(CN)₂)₂]⁻,其中[CpW(Se₂C=C(CN)₂)(Se(Se₂)C=C(CN)₂)]⁻(即5)作为主要产物被分离出来。在回流的THF中,用1/4当量的S₈处理2a导致硫插入,得到K[CpW(S₂C=C(CN)₂)(S(S₂)C=C(CN)₂)](6),它与两个THF分子结晶形成三维网络结构。6也可以通过在THF中用1/4当量的S₈回流2a来制备。在THF中用1摩尔硒粉处理3a时,3a很容易加成一个Se原子,以高产率得到4,而在THF中用2当量的Na₂Se处理3a或4则导致形成双核配合物[(CpMo)₂(μ-Se)(μ-Se(Se₃)C=C(CN)₂)](7)。7的结构由两个通过一个Se²⁻和一个[Se(Se₃)C=C(CN)₂]²⁻配体桥连的CpMo单元组成,其中三硒化物基团以近线性方式排列(163°)。2a与2当量的CuBr在CH₃CN中反应,得到三核配合物[Cp*WCu₂(μ-Br)(μ₃-S₂C=C(CN)₂)₂](8),它与一个CH₃CN结晶,并通过Cu与氰基的N键合形成一维链状聚合物。