Zhong Lirong, Mayer Alex S, Pope Gary A
Center for Petroleum and Geosystems Engineering, The University of Texas at Austin, Austin, TX 78712, USA.
J Contam Hydrol. 2003 Jan;60(1-2):55-75. doi: 10.1016/s0169-7722(02)00063-3.
Surfactant-enhanced aquifer remediation (SEAR) involves the injection of surfactant solutions into aquifers contaminated with nonaqueous phase liquids (NAPL). Batch and column experiments were used to assess the effect of surfactant formulation on the rate of NAPL solubilization. The experimental variables were surfactant type, surfactant concentration, electrolyte concentration, and cosolvent concentration. Model equations were proposed and solved to describe solubilization under the conditions of each type of experiment. Using these models, a solubilization rate constant, kappa(b), and an overall mass transfer rate coefficient, kappa, were estimated from the batch and column experiments, respectively. The solubilization rate constant was consistently sensitive to surfactant type, surfactant concentration, and electrolyte concentration. The estimated solubilization rate constants varied over two orders of magnitude. The results of the column experiments also were sensitive to the surfactant formulation. Variations in the fitted mass transfer rate coefficient parameter, beta(0), were related to variations in the surfactant formulations. A comparison between the results of the batch and column experiments yields an apparent relationship between beta(0) and kappa(b). This relationship suggests that the mass transfer rate coefficient is directly related to the formulation of the surfactant solution.
表面活性剂强化含水层修复(SEAR)涉及将表面活性剂溶液注入被非水相液体(NAPL)污染的含水层中。采用批次实验和柱实验来评估表面活性剂配方对NAPL溶解速率的影响。实验变量包括表面活性剂类型、表面活性剂浓度、电解质浓度和助溶剂浓度。提出并求解了模型方程,以描述每种实验类型条件下的溶解情况。利用这些模型,分别从批次实验和柱实验中估算出溶解速率常数κ(b)和总传质速率系数κ。溶解速率常数始终对表面活性剂类型、表面活性剂浓度和电解质浓度敏感。估算出的溶解速率常数在两个数量级范围内变化。柱实验结果也对表面活性剂配方敏感。拟合的传质速率系数参数β(0)的变化与表面活性剂配方的变化有关。批次实验和柱实验结果的比较得出了β(0)与κ(b)之间的明显关系。这种关系表明传质速率系数与表面活性剂溶液的配方直接相关。