Suppr超能文献

有机钛介导的苯乙烯和甲基丙烯酸甲酯的立体选择性配位/插入均聚和共聚反应。

Organotitanium-mediated stereoselective coordinative/insertive homopolymerizations and copolymerizations of styrene and methyl methacrylate.

作者信息

Jensen Tryg R, Yoon Sung Cheol, Dash Aswini K, Luo Lubin, Marks Tobin J

机构信息

Chemistry Department, Northwestern University, Evanston, IL 60208-3113, USA.

出版信息

J Am Chem Soc. 2003 Nov 26;125(47):14482-94. doi: 10.1021/ja0363664.

Abstract

This contribution describes coordinative/insertive stereoregular homopolymerizations and copolymerizations of styrene and methyl methacrylate (MMA) mediated by a highly active single-site organotitanium catalyst. The catalyst system used to effect these polymerizations of nonpolar and polar olefinic monomers is prepared by in situ Zn reduction of the precursor derived from the reaction (Me(5)Cp)TiMe(3) + Ph(3)C(+)B(C(6)F(5))(4)(-). The resulting catalyst produces polystyrene (>95% syndiotactic, 170 000 g/mol molecular weight; s-PS) by the established coordinative/insertive pathway. The same catalyst mediates polymerization of MMA to poly(methyl methacrylate) (>65% syndiotactic, >70 000 g/mol molecular weight; s-PMMA) by a group transfer protocol-like (GTP-like) pathway (1,4 insertion mechanism). Under optimal conditions, this catalyst also mediates the copolymerization of MMA + styrene (1:19 ratio) at 50 degrees C to yield random approximately 80% coisotactic poly[styrene-co-(methyl methacrylate)] (coiso-PSMMA) which contains approximately 4% MMA. Control experiments argue that a single-site Ti catalyst is the active species for the copolymerization. The catalyst formation process is quite general, and a variety of reducing agents can be substituted for Zn and still effect copolymerization. Control experiments also indicate that known noncoordination copolymerization mechanisms (i.e., ionic or radical) cannot explain this copolymerization. We suggest a new mechanism involving sequential conjugate addition steps to explain these copolymerization results.

摘要

本文介绍了由高活性单中心有机钛催化剂介导的苯乙烯和甲基丙烯酸甲酯(MMA)的配位/插入立构规整均聚和共聚反应。用于实现这些非极性和极性烯烃单体聚合的催化剂体系是通过原位用锌还原由反应(Me(5)Cp)TiMe(3)+Ph(3)C(+)B(C(6)F(5))(4)(-)衍生的前体而制备的。所得催化剂通过既定的配位/插入途径生成聚苯乙烯(间规度>95%,分子量170000 g/mol;s-PS)。相同的催化剂通过类似基团转移协议(GTP-like)的途径(1,4插入机理)将MMA聚合成聚(甲基丙烯酸甲酯)(间规度>65%,分子量>70000 g/mol;s-PMMA)。在最佳条件下,该催化剂还能在50℃介导MMA与苯乙烯(1:19比例)的共聚反应,生成随机的、间同立构规整度约为80%的聚[苯乙烯-co-(甲基丙烯酸甲酯)](coiso-PSMMA),其中含有约4%的MMA。对照实验表明,单中心钛催化剂是共聚反应的活性物种。催化剂的形成过程非常普遍,各种还原剂都可以替代锌,并且仍然能够实现共聚反应。对照实验还表明,已知的非配位共聚机理(即离子或自由基机理)无法解释这种共聚反应。我们提出了一种涉及连续共轭加成步骤的新机理来解释这些共聚反应结果。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验