Andronache M, de Chillou C, Miljoen H, Magnin-Poull I, Messier M, Dotto P, Beurrier D, Doan T, Houriez P, Bineau-Jorisse A, Thiel B, Brembilla-Perrot B, Massing J L, Sadoul N, Aliot E
Department of Cardiology, University Hospital Nancy, France.
Europace. 2003 Oct;5(4):335-41. doi: 10.1016/s1099-5129(03)00084-9.
Assessment of a bidirectional conduction block within the cavotricuspid isthmus (CTI) is critical during radiofrequency (RF) atrial flutter (AF) ablation. We investigated the use of bipolar atrial electrogram (BAE) morphology as an additional criterion identifying CTI block and tested it against two recognized criteria: differential pacing and reversal of the right atrial depolarization sequence during coronary sinus (CS) pacing.
An RF ablation procedure was performed during 600 ms CS pacing in 100 consecutive patients with a common AF. BAE recorded along the CTI were continuously monitored. CTI conduction block was achieved by RF ablation in all patients and a clear change in BAE polarity in the Electrogram recorded by the dipoles located on the CTI and immediately lateral to the intended line of block (RS to QR pattern) associated with a confirmed CTI conduction block was observed in all cases. BAE morphology changes predicted bidirectional CTI conduction blocks with a 100% positive and a 100% negative predictive value. At a mean follow-up of 33 +/- 11 months, there was a 5% AF recurrence rate.
Our study suggests that morphological changes in BAE recorded at sites lateral and adjacent to the target line of block may be used as a unique and robust criterion to validate CTI conduction block during AF ablation procedure.
在射频(RF)心房颤动(AF)消融术中,评估腔静脉三尖瓣峡部(CTI)内的双向传导阻滞至关重要。我们研究了使用双极心房电图(BAE)形态作为识别CTI阻滞的附加标准,并将其与两个公认标准进行对比测试:差异性起搏以及冠状窦(CS)起搏期间右心房去极化顺序的逆转。
对100例持续性AF患者在600毫秒CS起搏期间进行RF消融手术。持续监测沿CTI记录的BAE。所有患者均通过RF消融实现了CTI传导阻滞,并且在所有病例中均观察到位于CTI上以及紧邻预期阻滞线外侧的偶极记录的心电图中BAE极性有明显变化(从RS到QR模式),这与确认的CTI传导阻滞相关。BAE形态变化预测双向CTI传导阻滞的阳性预测值和阴性预测值均为100%。平均随访33±11个月时,AF复发率为5%。
我们的研究表明,在阻滞目标线外侧及相邻部位记录的BAE形态变化可作为在AF消融术中验证CTI传导阻滞的独特且可靠的标准。