Suppr超能文献

Evaluation of apically extruded debris in conventional and rotary instrumentation techniques.

作者信息

Bidar Maryam, Rastegar Akbar Fallh, Ghaziani Pari, Namazikhah M Sadegh

机构信息

Department of Endodontics, Faculty of Dentistry, Mashhad University, Mashhad, Iran.

出版信息

J Calif Dent Assoc. 2004 Sep;32(9):665-71.

Abstract

OBJECTIVE

The purpose of this in vitro study was to compare two common techniques, conventional and rotary instrumentation, in debris extrusion.

METHODS AND MATERIALS

Two hundred mature human teeth with mature apices and less than 15 degrees of root curvature as determined by Schneider's method were selected for use. Teeth were randomly divided into four groups of 50 teeth each and prepared using step-back instrumentation and profile 4 percent Taper Series 29 rotary system at three different speeds: 1,000 rpm, 8,000 rpm and 24,000 rpm. All of the speeds were reduced by contra angle to 1/6 rpm. Extruded debris were collected on pre-weighed vials containing distilled water through the apical foramen during instrumentation. The vials were then dried in a microwave oven at 150 degrees Celsius and weighed again. The difference was recorded as "the weight of the extruded debris." Eight control vials, two for each group, were weighed and filled with distilled water, dried, and reweighed. The mean weight of extruded debris for each group was statistically analyzed. T-student, unilateral variance analysis and Pearson tests were used in this study.

RESULTS

Step-back instrumentation (Group 1) produced significantly more debris than other groups. The difference in the amount of debris produced among rotary groups was not significant.

CONCLUSION

Rotary technique could reduce the amount of debris extrusion.

摘要

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验