Tencer Allan F, Kaufman Robert, Mack Christopher, Mock Charles
Department of Orthopedics, Harborview Medical Center, University of Washington, MS 359798, 325 Ninth Ave., Seattle, WA 98104, USA.
Accid Anal Prev. 2005 Mar;37(2):287-93. doi: 10.1016/j.aap.2004.09.005.
The goal of this study was to identify variables related to vehicle design which are associated with pelvic and thoracic accelerations as measured by the driver's (near side) crash dummy during new car assessment program (NCAP) testing of motor vehicles. Vehicle specific parameters were analyzed using NCAP side impact test results. Data from national automotive sampling system, crashworthiness data system (NASS-CDS) and crash injury research and engineering network (CIREN) (both National Highway Traffic Safety Administration (NHTSA) injury databases) were assessed to confirm NCAP test observations. In addition, door armrest stiffness measurements were performed using a mechanical tester on a sample of 40 vehicles. NCAP data showed that of 10 variables tested using multiple linear regression, vehicle weight and door crush correlated with pelvic acceleration of the driver's crash dummy (overall, r2=0.58, p=0.002, n=165). For thoracic trauma index (TTI) vehicle weight and peak door velocity correlated, significantly (overall, r2=0.41, p=0.03, n=165). Mean TTI was 63.7 g with no side airbag (n=108) and 55.6 g with a thoracic side airbag (n=54), p=0.01. The mean vehicle weight and door crush between airbag and no airbag groups were not significantly different. NASS-CDS data demonstrated a direct relationship between increased door crush and increased abbreviated injury score (AIS). CIREN data showed that occupants who sustained pelvic injuries had a median AIS of 3 with 24.9 cm of door crush, with abdominal injuries, a median AIS of 3 and 30 cm of crush, and with thoracic injuries, a median AIS of 4 and 34 cm of door crush. In addition, the frequency of bilateral pelvic injuries was significantly higher for subjects in CIREN crashes who were in a vehicle with a center console, but only if door intrusion was greater than 15 cm. This information may be useful in design of vehicles with greater protection in side impact crashes.
本研究的目的是确定与车辆设计相关的变量,这些变量与在机动车新车评估程序(NCAP)测试期间驾驶员(近侧)碰撞假人测量的骨盆和胸部加速度有关。使用NCAP侧面碰撞测试结果分析车辆特定参数。评估了来自国家汽车抽样系统、防撞性数据系统(NASS-CDS)和碰撞伤害研究与工程网络(CIREN)(均为美国国家公路交通安全管理局(NHTSA)伤害数据库)的数据,以确认NCAP测试观察结果。此外,使用机械测试仪对40辆汽车的样本进行了车门扶手刚度测量。NCAP数据显示,在使用多元线性回归测试的10个变量中,车辆重量和车门挤压与驾驶员碰撞假人的骨盆加速度相关(总体而言,r2 = 0.58,p = 0.002,n = 165)。对于胸部创伤指数(TTI),车辆重量和车门峰值速度显著相关(总体而言,r2 = 0.41,p = 0.03,n = 165)。无侧面安全气囊时平均TTI为63.7g(n = 108),有胸部侧面安全气囊时为55.6g(n = 54),p = 0.01。安全气囊组和无安全气囊组之间的平均车辆重量和车门挤压无显著差异。NASS-CDS数据表明车门挤压增加与简明损伤评分(AIS)增加之间存在直接关系。CIREN数据显示,骨盆受伤的乘客AIS中位数为3,车门挤压为24.9厘米;腹部受伤时,AIS中位数为3,挤压为30厘米;胸部受伤时,AIS中位数为4,车门挤压为34厘米。此外,在CIREN碰撞中,乘坐有中控台车辆的受试者双侧骨盆受伤的频率显著更高,但前提是车门侵入大于15厘米。这些信息可能有助于设计在侧面碰撞事故中具有更好保护性能的车辆。