Wang Wei, Tao Jianping, Li Zongfeng, Zhang Weiyin, Ding Yi
Key Laboratory of Eco-Environments of Three Gorges Reservoir Region, Ministry of Education, College of Life Science, Southwest China Normal University, Chongqing 400715, China.
Ying Yong Sheng Tai Xue Bao. 2004 Nov;15(11):1989-93.
This paper studied the size structure and formation pattern of gaps and the characteristics of gap makers (GM) in subalpine dark coniferous forests in Wolong Giant Panda Nature Reserve, Sichuan Province, China. The results showed that the gap density was 18.5 per hm2, and the area of canopy gap and extended gap accounted for 28.4% and 60% of total forest area, respectively. Canopy gap varied from 10 m2 to 1134.7 m2, and expanded gap varied from 84.11 m2 to 1646.3 m2. Canopy gaps and expanded gaps had an average area of 153.45 m2 and 324.34 m2, respectively. The average number of gap makers (GM) per gap was 5.14, and only 8.1% of all gaps were created by just one GM. The order of GM contributed to gap formation was trunk snap > uproot > standing death > branch breakage. Abies faxoniana, Tsuga chinensis, and Betula utilis were the major gap makers, while Abies faxoniana in the canopy layer with 60-70 cm DBH and 30-35 m high had the greatest probability of gap making.
本文研究了中国四川省卧龙大熊猫自然保护区亚高山暗针叶林林窗的大小结构、形成模式及林窗形成木(GM)特征。结果表明,林窗密度为18.5个/hm²,冠层林窗和扩展林窗面积分别占森林总面积的28.4%和60%。冠层林窗面积在10 m²至1134.7 m²之间,扩展林窗面积在84.11 m²至1646.3 m²之间。冠层林窗和扩展林窗的平均面积分别为153.45 m²和324.34 m²。每个林窗的平均形成木数量为5.14个,所有林窗中仅有8.1%是由单个形成木形成的。形成木对林窗形成的贡献顺序为:树干折断>连根拔起>立木死亡>树枝折断。岷江冷杉、铁杉和糙皮桦是主要的形成木,其中胸径60 - 70 cm、高30 - 35 m的冠层岷江冷杉形成林窗的概率最大。