Yu Na, Shao Changlu, Liu Yichun, Guan Hongyu, Yang Xinghua
Center for Advanced Optoelectronic Functional Materials Research, Northeast Normal University, Changchun 130024, People's Republic of China.
J Colloid Interface Sci. 2005 May 1;285(1):163-6. doi: 10.1016/j.jcis.2004.11.014.
Through sol-gel processing and electrospinning technique, extrathin fibers of poly(vinyl alcohol) (PVA)/lithium chloride/manganese acetate composite fibers were prepared. After calcination of the above precursor fibers at 600 degrees C, the spinel lithium manganese oxide (LiMn2O4) nanofibers, with a diameter of 100-200 nm, were successfully obtained. The fibers were investigated by TG-DTA, XRD, FT-IR, and SEM, respectively. The results showed that the crystalline phase and morphology of the fibers were largely influenced by the calcination temperature.
通过溶胶-凝胶工艺和静电纺丝技术,制备了聚(乙烯醇)(PVA)/氯化锂/醋酸锰复合纤维的超细纤维。将上述前驱体纤维在600℃下煅烧后,成功获得了直径为100-200nm的尖晶石型锂锰氧化物(LiMn2O4)纳米纤维。分别采用热重-差示热分析(TG-DTA)、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)和扫描电子显微镜(SEM)对纤维进行了研究。结果表明,煅烧温度对纤维的晶相和形貌有很大影响。