Montgomery William H, Wahl Melvin, Hettrich Carolyn, Itoi Eiji, Lippitt Steven B, Matsen Frederick A
Department of Orthopaedics and Sports Medicine, University of Washington Medical Center, Box 356500, 1959 N.E. Pacific Street, Seattle, WA 98195, USA.
J Bone Joint Surg Am. 2005 Sep;87(9):1972-7. doi: 10.2106/JBJS.D.02573.
Glenohumeral instability associated with a large osseous defect of the glenoid can be treated with bone graft to restore the glenoid concavity. The shape and positioning of the graft is critical: a graft that encroaches on the extrapolated glenoid curvature can prevent the head from seating completely in the glenoid, whereas a graft that is too far from the curvature does not restore the glenoid concavity. The purpose of the present study was to investigate how the intrinsic stability that is provided by the glenoid is affected by (1) a standardized anteroinferior glenoid defect and (2) different configurations of anteroinferior glenoid bone graft.
The anteroinferior stability provided by the glenoid was quantitated by measuring the balance stability angle in that direction. The balance stability angle is the maximal angle that the direction of the net humeral joint-reaction force can make with the glenoid centerline before dislocation takes place. The anteroinferior stability was assessed in each of four fresh-frozen, grossly normal cadaveric glenoids in (1) the unaltered state, (2) after the creation of a standardized defect of a magnitude that has been reported by other investigators to be sufficient to require a bone graft, and (3) after each step of a series of bone-grafting procedures involving grafts of varying height and contour.
The anteroinferior glenoid defect significantly diminished the anteroinferior stability by almost 50% (p = 0.006). Bone-grafting significantly increased the stability provided by the glenoid. The increase in stability as compared with that of the glenoid with the standardized defect was particularly marked for contoured graft heights of 6 and 8 mm, for which the increases were 150% (p = 0.0001) and 229% (p < 0.00025), respectively. Contouring of the graft minimized the potential for unwanted contact between the ball and the graft.
Anteroinferior shoulder instability caused by an osseous defect in the glenoid can be corrected with bone-grafting. The effectiveness of the graft in restoring the lost stability is related both to its height and to the extent to which it is contoured as long as the graft is not so prominent that it forces the ball posteriorly from the center of the glenoid.
与肩胛盂大骨缺损相关的盂肱关节不稳可通过植骨来恢复肩胛盂凹面进行治疗。植骨的形状和位置至关重要:侵犯外推肩胛盂曲率的植骨会阻止肱骨头完全落座于肩胛盂内,而距离曲率过远的植骨则无法恢复肩胛盂凹面。本研究的目的是调查肩胛盂提供的固有稳定性如何受到以下因素影响:(1)标准化的肩胛盂前下缺损;(2)肩胛盂前下植骨的不同构型。
通过测量该方向的平衡稳定角来量化肩胛盂提供的前下稳定性。平衡稳定角是肱骨头关节合力方向在脱位发生前与肩胛盂中心线所能形成的最大角度。在四个新鲜冷冻、大体正常的尸体肩胛盂中,分别在以下情况下评估前下稳定性:(1)未改变状态;(2)制造一个其他研究者报告的大小足以需要植骨的标准化缺损后;(3)在一系列涉及不同高度和轮廓植骨的植骨手术的每个步骤之后。
肩胛盂前下缺损使前下稳定性显著降低近50%(p = 0.006)。植骨显著增加了肩胛盂提供的稳定性。与有标准化缺损的肩胛盂相比,对于轮廓高度为6毫米和8毫米的植骨,稳定性增加尤为显著,分别增加了150%(p = 0.0001)和229%(p < 0.00025)。植骨的轮廓化使球与植骨之间不必要接触的可能性最小化。
肩胛盂骨缺损引起的前下肩部不稳可通过植骨矫正。植骨恢复失去稳定性的有效性与其高度以及轮廓化程度有关,只要植骨不过于突出以至于将球从肩胛盂中心向后推。