Surface clusters of colloid particles produced by deposition on sites.

The possibility of producing surface clusters of well-defined structure formed by colloid particles was analyzed theoretically and experimentally. Theoretical results were derived by performing Monte Carlo-type simulations according to the generalized random sequential adsorption (RSA) mechanism. In these simulations, the jamming coverage of particles adsorbing irreversibly on spherical sites was determined as a function of the particle-to-site size ratio lambda. It was revealed that, by properly choosing lambda, a targeted site coordination can be achieved; for example, there can be one, two, three, and so forth particles attached to one site. The structure of the heterogeneous clusters produced in this way was described in terms of the pair correlation function. It was predicted that the extent of ordering within surface clusters was diminished as the concentration of sites increased. These theoretical predictions were checked by performing deposition experiments of negatively charged polystyrene latex particles (average diameter 0.9 mum) under the diffusion-controlled transport regime. Mica sheets precovered by positively charged polystyrene latex (average diameters 0.45 and 0.95 microm) were used as the substrate surface in these experiments. Positive latex (site) deposition was also carried out under diffusion-controlled transport conditions. The concentration of the sites and the adsorbed particles was determined by direct particle counting using optical microscopy. It was found, in quantitative agreement with theoretical simulations, that the structure of surface clusters produced in this way exhibits a significant degree of short-range ordering. It also was proven experimentally that clusters containing a targeted number of colloid particles (e.g., 2 and 4) could be produced by the deposition procedure.