Li Jian, Ahmed Mahmood, Samnegård Eva, Ahmad Tashfeen, Stark Andre, Kreicbergs Andris
Section of Orthopedics, Department of Surgical Sciences, Karolinska Institute, Stockholm, Sweden.
Acta Orthop. 2005 Jun;76(3):434-41.
The different parts of long bone are known to participate in the spontaneous correction of fracture deformity. However, the relative contribution of growth plate, epiphysis and diaphysis of bone during the correction process is not clear.
We used a rat model of tibial fracture fixed with a semi-rigid intramedullary pin in anterior angulation, and evaluated the magnitude, temporal course and pertinent sites of spontaneous deformity correction by means of radiography and bone mineral uptake.
Over a 12-week period, the mean angular deformity was corrected from 27 degrees to 11 degrees. The major portion of the correction (14 degrees of 16 degrees) occurred within 3 weeks, concomitantly with fracture healing. The angle of the proximal growth plate changed 8 degrees over the study period. The first 3 weeks were characterized by intense bone formation on the concave side of the fracture. From weeks 3-8, signs of resorption predominated on the corresponding convex side. On the concave side, the front of new bone formation in the proximal diaphysis moved in the opposite direction to that at the fracture level, so that both sites contributed to deformity correction.
We found that different sites of a diaphyseal bone fractured in angulation respond quite differently, but still in an orchestrated way to promote correction by modeling. Notably, most of the spontaneous correction occurred during the reparative phase, the major contributor being the diaphysis, not the growth plate. Compared to other reports on angulated fracture using rigid fixation and limb immobilization, our data suggest that semi-rigid fixation and early weight bearing is more efficient in enhancing not only healing, but also deformity correction.
已知长骨的不同部位参与骨折畸形的自发矫正。然而,在矫正过程中,生长板、骨骺和骨干的相对作用尚不清楚。
我们使用大鼠胫骨骨折模型,采用半刚性髓内针在前侧成角方向固定,通过X线摄影和骨矿物质摄取评估自发畸形矫正的程度、时间进程及相关部位。
在12周的时间里,平均角畸形从27度矫正至11度。大部分矫正(16度中的14度)发生在3周内,与骨折愈合同步。在研究期间,近端生长板的角度变化了8度。最初3周的特征是骨折凹侧有强烈的骨形成。从第3周到第8周,相应凸侧以吸收迹象为主。在凹侧,近端骨干新骨形成的前沿与骨折部位的方向相反,因此这两个部位都有助于畸形矫正。
我们发现,成角骨折的骨干不同部位反应差异很大,但仍以协调的方式通过塑形促进矫正。值得注意的是,大部分自发矫正发生在修复期,主要贡献者是骨干,而非生长板。与其他关于使用刚性固定和肢体固定的成角骨折的报告相比,我们的数据表明,半刚性固定和早期负重不仅在促进愈合方面更有效,而且在畸形矫正方面也更有效。