Johnson Robert A, Borhan Ali
Department of Chemical Engineering, Pennsylvania State University, University Park, PA 16802, USA.
J Colloid Interface Sci. 2003 May 15;261(2):529-41. doi: 10.1016/S0021-9797(03)00031-6.
The effect of bulk-soluble surfactants on the dynamics of a drop translating through a cylindrical tube under low-Reynolds-number conditions is investigated. Interfacial surfactant adsorption/desorption is modeled according to the Frumkin adsorption framework, and the bulk-insoluble surfactant limit is recovered as the rate of surfactant sorption becomes large compared to that of bulk diffusion. As the equilibrium surface coverage is increased, the mechanism by which drop mobility is reduced changes from uniform retardation at low surface coverage to the formation of a stagnant cap at high surface coverage. For large capillary numbers, the drop does not achieve a steady shape, and eventually it breaks up either through the formation of a penetrating viscous jet of suspending fluid, or by continuous elongation and pinch-off. Surfactants have a destabilizing effect on transient drop shapes by accelerating the formation and development of the penetrating viscous jet that leads to drop breakup. The critical conditions for drop breakup, as well as the mode of breakup, depend on the manner in which the strength of the flow (i.e., the capillary number) is increased.
研究了在低雷诺数条件下,本体可溶表面活性剂对液滴在圆柱形管道中平移动力学的影响。界面表面活性剂的吸附/解吸是根据弗鲁姆金吸附框架进行建模的,当表面活性剂吸附速率比本体扩散速率大时,可恢复到本体不溶表面活性剂的极限情况。随着平衡表面覆盖率的增加,液滴迁移率降低的机制从低表面覆盖率下的均匀减速转变为高表面覆盖率下停滞帽的形成。对于较大的毛细管数,液滴无法达到稳定形状,最终它会通过形成悬浮流体的穿透粘性射流或通过连续伸长和夹断而破裂。表面活性剂通过加速导致液滴破裂的穿透粘性射流的形成和发展,对瞬态液滴形状产生去稳定作用。液滴破裂的临界条件以及破裂模式取决于流动强度(即毛细管数)增加的方式。