Artun Jon, Behbehani Faraj, Thalib Lukman
Department of Developmental and Preventive Sciences, Faculty of Dentistry, Kuwait University, Kuwait City, Kuwait.
Angle Orthod. 2005 Nov;75(6):904-11. doi: 10.1043/0003-3219(2005)75[904:POMTMI]2.0.CO;2.
The purpose of this study was to identify risk factors for maxillary third molar impaction in adolescent orthodontic patients. Radiographs made before treatment (T1) and after treatment (T2) and at a minimum of 10 years postretention (T3) of 132 patients that allowed accurate diagnosis of impaction vs eruption of one or both maxillary third molars were evaluated. Although univariate logistic regression revealed that the decision to extract premolars reduced the risk of impaction by 76% (P < .01), this parameter was not included in the final prediction model at T1. Multiple logistic regression analyses revealed that third molar impaction could be predicted at T1 according to the size of the retromolar space and the amount of mesial molar movement that will occur during active appliance therapy, reducing the risk of impaction by 22% and 34% for every millimeter increase in distance, respectively (P < .01). At T2, multiple logistic regression revealed that the odds of impaction were more than 60 times higher (P < .01) if the third molar was angulated mesially as compared with less than 30 degrees distally relative to the occlusal plane and almost five times (P < .05) higher if the third molar was angulated more than 30 degrees distally as compared with less than 30 degrees distally. Similar analyses at T2 showed 29% reduced risk of impaction for every millimeter increase in retromolar space and 18% reduced risk for every degree increase in angle MP/SN (P < .01).
本研究的目的是确定青少年正畸患者上颌第三磨牙阻生的危险因素。对132例患者治疗前(T1)、治疗后(T2)以及保持至少10年后(T3)拍摄的X线片进行评估,这些X线片能够准确诊断一侧或双侧上颌第三磨牙是阻生还是萌出。尽管单因素逻辑回归分析显示拔除前磨牙的决定可使阻生风险降低76%(P < 0.01),但该参数未纳入T1期的最终预测模型。多因素逻辑回归分析显示,根据磨牙后间隙的大小以及活动矫治器治疗期间将发生的近中磨牙移动量,可在T1期预测第三磨牙阻生,间隙距离每增加1毫米,阻生风险分别降低22%和34%(P < 0.01)。在T2期,多因素逻辑回归分析显示,如果第三磨牙相对于咬合平面近中倾斜,阻生几率比远中倾斜小于30度时高60倍以上(P < 0.01);如果第三磨牙远中倾斜大于30度,与远中倾斜小于30度相比,阻生几率高近5倍(P < 0.05)。T2期的类似分析显示,磨牙后间隙每增加1毫米,阻生风险降低29%;MP/SN角每增加1度,阻生风险降低18%(P < 0.01)。