Miwa Yohei, Yamamoto Katsuhiro, Tanabe Takuya, Okamoto Shigeru, Sakaguchi Masato, Sakai Masahiro, Shimada Shigetaka
Department of Materials Science & Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555, Japan.
J Phys Chem B. 2006 Mar 9;110(9):4073-82. doi: 10.1021/jp056502m.
Molecular mobility in the interfacial region of a microphase-separated structure was studied in binary mixtures of AB-type diblock copolymers and homopolymers (miscible with only A) by the spin-label technique. In this study, we prepared (a) binary blends of polystyrene-block-poly(methyl acrylate) (PS-block-PMA) and homopolymer poly(cyclohexyl acrylate)'s having the number-averaged molecular weight (Mn) of 1000 (PCHA-S) and (b) having the Mn of 17300 (PCHA-L), and (c) binary mixtures of the PS-block-PMA and homopolymer PS with the Mn of 900 (PS-1). Emphasis was placed on effects of the molecular weight and the miscibility of added homopolymers on the mobility in the interfacial region of the microphase separation. Selective incorporation of the added PCHA-S, PCHA-L, and PS-1 into the PS phase of the PS-block-PMA was confirmed by modulated-temperature differential scanning calorimetry (MDSC) measurement as a decrease in the glass transition temperature of the PS phase. Moreover, the MDSC and small-angle X-ray scattering (SAXS) measurements suggested that the spatial distributions of the PCHA-S and PS-1 in the PS phase were relatively uniform because of their small Mn. On the other hand, the distribution of the PCHA-L in the PS phase was somewhat heterogeneous because of the large Mn of the PCHA-L. The spin-label at the junction point of the PS-block-PMA allowed us to estimate the mobility in the interfacial region of the microphase separation. Influence of the PCHA-S and PCHA-L on the mobility in the interfacial region was negligible even though the relatively uniform distribution of the PCHA-S in the PS phase was suggested by the SAXS and MDSC. More uniform distribution of the PS-1 than that of the PCHA-S in the PS phase was suggested by the SAXS, and the mobility in the interfacial region was slightly enhanced by the addition of the PS-1. However, the mobility was almost constant against an increase in the PS-1. The PS-1 was considered to be penetrated into the interfacial region and activated the mobility, but the fraction of the PS-1 in the interfacial region was constant irrespective of the blended amount of the PS-1. These results suggest that effects of homopolymers on the mobility in the interface are significantly related to their spatial distribution in the host phase.
通过自旋标记技术研究了AB型二嵌段共聚物与均聚物(仅与A混溶)的二元混合物中微相分离结构界面区域的分子流动性。在本研究中,我们制备了:(a)聚苯乙烯-嵌段-聚(甲基丙烯酸甲酯)(PS-嵌段-PMA)与数均分子量(Mn)为1000的均聚物聚(丙烯酸环己酯)(PCHA-S)的二元共混物;(b)Mn为17300的(PCHA-L);以及(c)PS-嵌段-PMA与Mn为900的均聚物PS(PS-1)的二元混合物。重点研究了添加的均聚物的分子量和混溶性对微相分离界面区域流动性的影响。通过调制温度差示扫描量热法(MDSC)测量,证实添加的PCHA-S、PCHA-L和PS-1选择性地掺入PS-嵌段-PMA的PS相中,表现为PS相玻璃化转变温度的降低。此外,MDSC和小角X射线散射(SAXS)测量表明,由于PCHA-S和PS-1的Mn较小,它们在PS相中的空间分布相对均匀。另一方面,由于PCHA-L的Mn较大,其在PS相中的分布有些不均匀。PS-嵌段-PMA连接点处的自旋标记使我们能够估计微相分离界面区域的流动性。尽管SAXS和MDSC表明PCHA-S在PS相中分布相对均匀,但PCHA-S和PCHA-L对界面区域流动性的影响可以忽略不计。SAXS表明PS-1在PS相中的分布比PCHA-S更均匀,并且添加PS-1会使界面区域的流动性略有增强。然而,随着PS-1含量的增加,流动性几乎保持不变。PS-1被认为渗透到界面区域并激活了流动性,但PS-1在界面区域的比例与PS-1的共混量无关,保持恒定。这些结果表明,均聚物对界面流动性的影响与其在主体相中的空间分布密切相关。