Suppr超能文献

上流式厌氧污泥床(UASB)反应器中颗粒污泥的生物制氢。I:产氢颗粒污泥的物理化学特性。

Biological hydrogen production in a UASB reactor with granules. I: Physicochemical characteristics of hydrogen-producing granules.

作者信息

Mu Yang, Yu Han-Qing

机构信息

Lab of Environmental Biotechnology, School of Chemistry, University of Science & Technology of China, Hefei, Anhui 230026, China.

出版信息

Biotechnol Bioeng. 2006 Aug 5;94(5):980-7. doi: 10.1002/bit.20924.

Abstract

Hydrogen-producing granules with an excellent settling ability were cultivated in an upflow anaerobic sludge blanket reactor treating a sucrose-rich synthetic wastewater. The physicochemical characteristics of granules were evaluated in this study. The mature granules had a diameter ranging from 1.0 to 3.5 mm and an average density of 1.036 +/- 0.005 g/mL, whereas they had good settling ability and a high settling velocity of 32-75 m/h. The low ratio of proteins/carbohydrates for the extracellular polymeric substances (EPS) in the granules suggests that carbohydrates rather than proteins, might play a more important role in the formation of the H(2)-producing granules. The contact angle of the mature granules, 54 +/- 2 degrees , was larger than that of the seed sludge (38 +/- 2 degrees ), indicating that the microbial cells in the H(2)-producing granules had higher hydrophobicity. The granules had fractal nature with a fractal dimension of 1.78. Their porosities were in the range of 0-0.70, and increased with increasing granule size. The ratios between the observed and predicted settling velocities by Stokes' law were in a range of 1.00-1.50, and the fluid collection efficiency of the granules ranged from 0 to 0.19, indicating that their permeabilities were lower and that there was little advective flow through their interior. Experimental results also suggest that molecular diffusion appeared to play an important role in the mass transfer through the H(2)-producing granules.

摘要

在处理富含蔗糖的合成废水的上流式厌氧污泥床反应器中培养出了具有出色沉降能力的产氢颗粒。本研究对颗粒的物理化学特性进行了评估。成熟颗粒的直径为1.0至3.5毫米,平均密度为1.036±0.005克/毫升,同时它们具有良好的沉降能力,沉降速度高达32 - 75米/小时。颗粒中细胞外聚合物(EPS)的蛋白质/碳水化合物比例较低,这表明碳水化合物而非蛋白质可能在产氢颗粒的形成中发挥更重要的作用。成熟颗粒的接触角为54±2度,大于接种污泥的接触角(38±2度),这表明产氢颗粒中的微生物细胞具有更高的疏水性。颗粒具有分形性质,分形维数为1.78。它们的孔隙率在0至0.70范围内,并随颗粒尺寸的增加而增大。通过斯托克斯定律观察到的沉降速度与预测沉降速度之比在1.00至1.50范围内,颗粒的流体收集效率在0至0.19范围内,这表明它们的渗透率较低,并且几乎没有平流通过其内部。实验结果还表明,分子扩散似乎在通过产氢颗粒的传质过程中起重要作用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验