Higashino Ryoji
Section of Maxillofacial Orthognathics, Department of Maxillofacial Reconstruction and Function, Division of Maxillofacial/Neck Reconstruction, Graduate School, Tokyo Medical and Dental University.
Kokubyo Gakkai Zasshi. 2006 Mar;73(1):116-24. doi: 10.5357/koubyou.73.116.
The purpose of this study was to observe the morphological relationship between maxillofacial skeleton and masseter by superimposing the masseter image constructed by MR image scanning on the cephalogram. Sixteen subjects with different mandibular plane angle were examined in this study. Cephalogram and MR images of each subject were taken, and the images were input to a computer by using a digitizer. The areas of masseter were selected in each MR scan image which were projected to the mid-sagittal layer of the MR scan images. The synthesized image of cephalogram and masseter was obtained by completely superimposing sagittal images of the masseter with the mid-sagittal-plane MR image on the cephalogram. The inclination of masseter was determined by the center of gravity on the cross-section of masseter. These synthesized images of cephalogram and masseter showed various shapes of masseter according to different mandibular plane angle. The inclination of masseter had a close correlation with some skeletal parameters (mandibular plane angle, ANB, Y-axis, facial angle, saddle angle) of cephalometric analysis. The volume of the masseter also had a close correlation with skeletal parameters (mandibular plane angle, gonial angle, Y-axis). These results revealed that morphometric analysis using synthesized images of cephalogram and masseter is useful, and that the inclination and the volume of masseter may have an influence on the shape of the mandibular bone and its vertical and anteroposterior development.
本研究的目的是通过将磁共振成像(MR)扫描构建的咬肌图像叠加在头影测量片上,观察颌面骨骼与咬肌之间的形态学关系。本研究对16名具有不同下颌平面角的受试者进行了检查。拍摄了每位受试者的头影测量片和MR图像,并使用数字化仪将图像输入计算机。在每个MR扫描图像中选择投影到MR扫描图像正中矢状层面的咬肌区域。通过将咬肌的矢状图像与头影测量片上的正中矢状面MR图像完全叠加,获得头影测量片与咬肌的合成图像。咬肌的倾斜度由咬肌横截面上的重心确定。这些头影测量片与咬肌的合成图像显示出根据不同下颌平面角的咬肌的各种形状。咬肌的倾斜度与头影测量分析的一些骨骼参数(下颌平面角、ANB、Y轴、面角、鞍角)密切相关。咬肌的体积也与骨骼参数(下颌平面角、下颌角、Y轴)密切相关。这些结果表明,使用头影测量片与咬肌的合成图像进行形态计量分析是有用的,并且咬肌的倾斜度和体积可能对下颌骨的形状及其垂直和前后向发育有影响。