Wang Yixuan, Balbuena Perla B
Department of Chemical Engineering, Texas A&M University, 3122 TAMU, College Station, Texas 77843.
J Phys Chem B. 2005 Aug 11;109(31):14896-907. doi: 10.1021/jp050241z.
Car-Parrinello molecular dynamics simulations have been performed to investigate the oxygen reduction reaction (ORR) on a Pt(111) surface at 350 K. By progressive loading of (H3O)(+)(H2O)(2,3) + e- into a simulation cell containing a Pt slab and O2 for the first reduction step, and either products or intermediate species for the subsequent reduction steps, the detailed mechanisms of the ORR are well illustrated via monitoring MD trajectories and analyzing Kohn-Sham electronic energies. A proton transfer is found to be involved in the first reduction step; depending on the initial proton-oxygen distance, on the degree of proton hydration, and on the surface charge, such transfer may take place either earlier or later than the O2 chemisorption, in all cases forming an adsorbed end-on complex H-O-O*. Decomposition of H-O-O* takes place with a rather small barrier, after a short lifetime of approximately 0.15 ps, yielding coadsorbed oxygen and hydroxyl (O + HO*). Formation of the one-end adsorbed hydrogen peroxide, HOOH, is observed via the reduction of H-O-O, which suggests that the ORR may also proceed via HOOH, i.e., a series pathway. However, HOOH readily dissociates homolytically into two coadsorbed hydroxyls (HO* + HO*) rather than forming a dual adsorbed HOOH. Along the direct pathway, the reduction of H-O* + O* yields two possible products, O* + H2O* and HO* + HO*. Of the three intermediates from the second electron-transfer step, HOOH from the series pathway has the highest energy, followed by O + H2O* and HO* + HO* from the direct pathway. It is therefore theoretically validated that the O2 reduction on a Pt surface may proceed via a parallel pathway, the direct and series occurring simultaneously, with the direct as the dominant step.
已进行了卡-帕里尼罗分子动力学模拟,以研究350K下铂(111)表面的氧还原反应(ORR)。通过将(H3O)(+)(H2O)(2,3)+ e-逐步加载到包含铂板和O2的模拟单元中进行第一步还原,后续还原步骤则加载产物或中间物种,通过监测分子动力学轨迹和分析科恩-沈电子能量,很好地阐明了ORR的详细机制。发现质子转移参与第一步还原;根据初始质子-氧距离、质子水合程度和表面电荷,这种转移可能比O2化学吸附更早或更晚发生,在所有情况下都会形成吸附的端对端络合物H-O-O*。H-O-O在约0.15 ps的短寿命后,以相当小的势垒进行分解,产生共吸附的氧和羟基(O + HO)。通过H-O-O的还原观察到一端吸附的过氧化氢HOOH的形成,这表明ORR也可能通过HOOH进行,即串联途径。然而,HOOH很容易均裂分解为两个共吸附的羟基(HO* + HO*),而不是形成双吸附的HOOH。沿着直接途径,H-O* + O的还原产生两种可能的产物,O + H2O和HO + HO*。在第二步电子转移步骤的三种中间体中,串联途径的HOOH能量最高,其次是直接途径的O + H2O和HO + HO*。因此,从理论上验证了铂表面的O2还原可能通过平行途径进行,直接途径和串联途径同时发生,以直接途径为主导步骤。