Singh Boor, Sekhon S S
Department of Applied Physics, Guru Nanak Dev University, Amritsar-143005, India.
J Phys Chem B. 2005 Sep 1;109(34):16539-43. doi: 10.1021/jp051673c.
Room temperature ionic liquid (DMOImTf) based upon 2,3-dimethyl-1-octylimidazolium cation and trifluoromethanesulfonate or triflate (CF(3)SO(3))(-) anion has been synthesized and shows conductivity of 5.68 mS/cm and viscosity of 26.4 cP at 25 degrees C. Ion conducting polymer electrolytes based on polymers (poly(ethylene oxide) (PEO) and polyvinylidenefluoride-co-hexafluoropropylene (PVdF-HFP)) and ionic liquid (DMOImTf) were prepared in film form by the casting technique. The conductivity of polymer electrolytes containing 0.5 M LiCF(3)SO(3) in PEO:DMOImTf taken in equal weight ratio increases with the addition of propylene carbonate (PC) while its mechanical stability improved by dispersing nanosize fumed silica. However, polymer electrolytes containing PVdF-HFP and ionic liquid show a high value of conductivity (10(-4)-10(-3) S/cm) alongwith better mechanical stability.
基于2,3 - 二甲基 - 1 - 辛基咪唑阳离子和三氟甲磺酸根或三氟甲磺酸盐(CF(3)SO(3))(-)阴离子的室温离子液体(DMOImTf)已被合成,在25℃时显示出5.68 mS/cm的电导率和26.4 cP的粘度。基于聚合物(聚环氧乙烷(PEO)和聚偏氟乙烯 - 共 - 六氟丙烯(PVdF - HFP))和离子液体(DMOImTf)的离子导电聚合物电解质通过流延技术制备成膜状。在PEO:DMOImTf中以等重量比含有0.5 M LiCF(3)SO(3)的聚合物电解质的电导率随着碳酸丙烯酯(PC)的加入而增加,同时通过分散纳米级气相二氧化硅提高了其机械稳定性。然而,含有PVdF - HFP和离子液体的聚合物电解质显示出高电导率值(10(-4)-10(-3) S/cm)以及更好的机械稳定性。