Rickert Dorothee, Scheithauer Marc O, Coskun Saadet, Lendlein Andreas, Kelch Steffen, Franke Ralf-Peter
Universitätsklinik für Hals-Nasen-Ohrenheilkunde, Universität Ulm, Deutschland.
Biomed Tech (Berl). 2006 Sep;51(3):116-24. doi: 10.1515/BMT.2006.020.
The stability and tight integration into adjacent tissue of a novel, degradable, elastic copolymer were examined in an animal model. The biomaterial was used for the reconstruction of a gastric wall defect in Sprague-Dawley rats (n=42) to test the polymeric material under the extreme chemical, enzymatical and mechanical conditions of the stomach. In the control group (n=21) the same defect of the gastric wall was primarily closed without biomaterial implantation. In the baseline group (n=21) the animals were kept under standard conditions without any surgical procedure. The implantation periods were 1 week, 4 weeks and 6 months. The animals' weight was determined preoperatively and before explantation. After explantation, air was pumped into the stomach and the pressure was measured by using a pressure-gauge in order to test whether the surgically produced union of the stomach wall and the polymer patch was gas-tight. After 1 week of implantation time a statistically significant increase of the body weight of the animals was found only in the baseline group. Four weeks and 6 months after the abdominal surgical procedure, a statistically significant increase of the animals' weight was found in the implantation group, the control and the baseline group. Gastrointestinal complications like fistula, perforation or peritonitis did not occur in any of the animals. The measurement of the stomach pressure after maximal gas insufflation did not show significant differences between the implantation group, the control and the baseline group in any of the time periods investigated. Despite very high strains of the gastric wall, no gas leakage was detected. There was a tight connection between the polymer and the adjacent stomach wall in all animals investigated. An adequate mechanical stability of the biomaterial was detectable under the extreme pathophysiological conditions of the stomach milieu. A fast and unfavourable degradation of the degradable polymer was not found in any of the animals. Further investigations are needed to analyse the mechanisms of the tissue integration of the biomaterial as well as the degradation kinetic of the polymer and the process of the tissue remodeling. The knowledge of these processes is necessary to adapt the novel biomaterial and thus prepare it for the use and implantation in different body locations and to develop novel therapeutical options in medicine.
在动物模型中检测了一种新型可降解弹性共聚物的稳定性及其与相邻组织的紧密整合情况。该生物材料用于修复Sprague-Dawley大鼠(n = 42)的胃壁缺损,以在胃的极端化学、酶学和机械条件下测试该聚合材料。在对照组(n = 21)中,胃壁的相同缺损在未植入生物材料的情况下进行了一期缝合。在基线组(n = 21)中,动物在标准条件下饲养,未进行任何手术操作。植入期为1周、4周和6个月。在术前和取出前测定动物体重。取出后,向胃内注入空气,并使用压力计测量压力,以测试手术造成的胃壁与聚合物补片的结合是否气密。植入1周后,仅在基线组发现动物体重有统计学意义的增加。腹部手术后4周和6个月,植入组、对照组和基线组的动物体重均有统计学意义的增加。所有动物均未发生瘘管、穿孔或腹膜炎等胃肠道并发症。在任何研究时间段内,最大气体注入后胃压力的测量在植入组、对照组和基线组之间均未显示出显著差异。尽管胃壁承受了很高的张力,但未检测到气体泄漏。在所有研究的动物中,聚合物与相邻胃壁之间存在紧密连接。在胃环境的极端病理生理条件下,可检测到生物材料具有足够的机械稳定性。在任何动物中均未发现可降解聚合物的快速且不良降解情况。需要进一步研究来分析生物材料的组织整合机制以及聚合物的降解动力学和组织重塑过程。了解这些过程对于调整新型生物材料以使其适用于不同身体部位的使用和植入,并开发新的医学治疗方案是必要的。