Qian Jinghua, West Ann H, Cook Paul F
Department of Chemistry and Biochemistry, University of Oklahoma, 620 Parrington Oval, Norman, Oklahoma 73019, USA.
Biochemistry. 2006 Oct 3;45(39):12136-43. doi: 10.1021/bi060889h.
Homocitrate synthase (acetyl-coenzyme A:2-ketoglutarate C-transferase; E.C. 2.3.3.14) catalyzes the condensation of AcCoA and alpha-ketoglutarate to give homocitrate and CoA. The enzyme was found to be a Zn-containing metalloenzyme using inductively coupled plasma mass spectrometry. Dead-end analogues of alpha-ketoglutarate were used to obtain information on the topography of the alpha-ketoglutarate binding site. The alpha-carboxylate and alpha-oxo groups of alpha-ketoglutarate are required for optimum binding to coordinate to the active site Zn. Optimum positioning of the alpha-carboxylate, alpha-oxo, and gamma-carboxylate of alpha-ketoglutarate is likely mimicked by the location in space of the 2-carboxylate, pyridine nitrogen, and 4 carboxylate of pyridine 2,4-dicarboxylate. The pH dependence of the kinetic parameters was determined to obtain information on the chemical mechanism of homocitrate synthase. The V profile is bell shaped with slopes of 1 and -1, giving pKa values of 6.7 and 8.0, while V/K(AcCoA) exhibits a slope of 2 on the acidic side with an average pKa value of 6.6 and a slope of -2 on basic side of the profile with an average pKa value of 8.2. The V/K(alpha-Kg) pH-rate profile exhibits a single pKa of 6.9 on the acidic side and two on the basic side with an average value of 7.8. The pH dependence of the Ki for glyoxylate, a competitive inhibitor vs alpha-ketoglutarate, gives a pKa of 7.1 for a group, required to be protonated for optimum binding. Data suggest a chemical mechanism for the enzyme in which alpha-ketoglutarate first binds to the active site Zn via its alpha-carboxylate and alpha-oxo groups, followed by acetyl-CoA. A general base then accepts a proton from the methyl of acetyl-CoA, and a general acid protonates the carbonyl of alpha-ketoglutarate in the formation of homocitryl-CoA. The general acid then acts as a base in deprotonating Zn-OH2 in the hydrolysis of homocitryl-CoA to give homocitrate and CoA. A solvent deuterium kinetic isotope effect of 1 is measured for homocitrate synthase, while a small pH-independent primary kinetic deuterium isotope effect (approximately 1.3) is observed using deuterioacetyl-CoA. Data suggest rate-limiting condensation to form the alkoxide of homocitryl-CoA, followed by hydrolysis to give products.
高柠檬酸合酶(乙酰辅酶A:2-酮戊二酸C-转移酶;E.C. 2.3.3.14)催化乙酰辅酶A与α-酮戊二酸缩合生成高柠檬酸和辅酶A。使用电感耦合等离子体质谱法发现该酶是一种含锌金属酶。利用α-酮戊二酸的终产物类似物来获取有关α-酮戊二酸结合位点拓扑结构的信息。α-酮戊二酸的α-羧基和α-氧代基团对于与活性位点锌进行最佳结合并配位是必需的。α-酮戊二酸的α-羧基、α-氧代基团和γ-羧基的最佳定位可能由吡啶-2,4-二羧酸的2-羧基、吡啶氮和4-羧基在空间中的位置模拟。测定动力学参数的pH依赖性以获取有关高柠檬酸合酶化学机制的信息。V曲线呈钟形,斜率分别为1和-1,pKa值分别为6.7和8.0,而V/K(乙酰辅酶A)在酸性侧斜率为2,平均pKa值为6.6,在碱性侧斜率为-2,平均pKa值为8.2。V/K(α-Kg)pH速率曲线在酸性侧有一个单一的pKa值6.9,在碱性侧有两个,平均值为7.8。乙醛酸作为α-酮戊二酸的竞争性抑制剂,其Ki的pH依赖性表明一个基团的pKa值为7.1,该基团需要质子化才能实现最佳结合。数据表明该酶的化学机制为:α-酮戊二酸首先通过其α-羧基和α-氧代基团与活性位点锌结合,随后是乙酰辅酶A。然后一个通用碱从乙酰辅酶A的甲基接受一个质子,一个通用酸在形成高柠檬酰辅酶A时使α-酮戊二酸的羰基质子化。然后通用酸在高柠檬酰辅酶A水解生成高柠檬酸和辅酶A的过程中作为碱使锌-水合氢离子去质子化。高柠檬酸合酶的溶剂氘动力学同位素效应为1,而使用氘代乙酰辅酶A时观察到一个小的与pH无关的一级动力学氘同位素效应(约1.3)。数据表明限速缩合形成高柠檬酰辅酶A的醇盐,随后水解生成产物。