Muguruma Hitoshi, Kase Yoshihiro, Murata Naoya, Matsumura Kazunari
Faculty of Engineering, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-ku, Tokyo 1358-8548, Japan.
J Phys Chem B. 2006 Dec 28;110(51):26033-9. doi: 10.1021/jp063755m.
Adsorption of glucose oxidase (GOD) onto plasma-polymerized thin films (PPF) with nanoscale thickness was characterized by atomic force microscopy (AFM), quartz crystal microbalance (QCM), and electrochemical measurements. The PPF surface is very flat (less than 1-nm roughness), and its properties (charge and wettability) can be easily changed while retaining the backbone structure. We focused on three types of surfaces: (1) the pristine surface of hexamethyldisiloxane (HMDS) PPF (hydrophobic and neutral surface), (2) an HMDS PPF surface with nitrogen-plasma treatment (hydrophilic and positive-charged surface), and (3) an HMDS PPF surface treated with oxygen plasma (hydrophilic and negative-charged surface). The AFM image showed that the GOD molecules were densely adsorbed onto surface 2 and that individual GOD molecules could be observed. The longer axis of GOD ellipsoid molecules were aligned parallel to the surface, called the "lying position", because of electrostatic association. On surface 1, clusters of GOD molecules did not completely cover the original PPF surface (surface coverage was ca. 60%). The 10-nm-size step height between the GOD clusters and the PPF surface suggests that the longer axes of individual GOD molecules were aligned perpendicular to the surface, called the "standing position". On surface 3, only a few of the GOD molecules were adsorbed because of electrostatic repulsion. These results indicate that the plasma polymerization process can facilitate enhancement or reduction of protein adsorption. The AFM images show a corresponding tendency with the QCM profiles. The QCM data indicate that the adsorption behavior obeys the Langmuir isotherm equation. The amperometric biosensor characteristics of the GOD-adsorbed PPF on a platinum electrode showed an increment in the current because of enzymatic reaction with glucose addition, indicating that enzyme activity was mostly retained in spite of irreversible adsorption.
采用原子力显微镜(AFM)、石英晶体微天平(QCM)和电化学测量方法对葡萄糖氧化酶(GOD)在具有纳米级厚度的等离子体聚合薄膜(PPF)上的吸附进行了表征。PPF表面非常平整(粗糙度小于1纳米),并且在保留主链结构的同时,其性质(电荷和润湿性)可以很容易地改变。我们重点研究了三种类型的表面:(1)六甲基二硅氧烷(HMDS)PPF的原始表面(疏水且中性的表面),(2)经过氮等离子体处理的HMDS PPF表面(亲水且带正电荷的表面),以及(3)经过氧等离子体处理的HMDS PPF表面(亲水且带负电荷的表面)。AFM图像显示,GOD分子密集吸附在表面2上,并且可以观察到单个GOD分子。由于静电缔合,GOD椭球形分子的长轴与表面平行排列,称为“平躺位置”。在表面1上,GOD分子簇没有完全覆盖原始PPF表面(表面覆盖率约为60%)。GOD分子簇与PPF表面之间10纳米大小的台阶高度表明,单个GOD分子的长轴与表面垂直排列,称为“直立位置”。在表面3上,由于静电排斥,只有少数GOD分子被吸附。这些结果表明,等离子体聚合过程可以促进蛋白质吸附的增强或减少。AFM图像与QCM曲线显示出相应的趋势。QCM数据表明,吸附行为符合朗缪尔等温方程。铂电极上吸附了GOD的PPF的安培型生物传感器特性表明,由于添加葡萄糖后的酶促反应,电流增加,这表明尽管存在不可逆吸附,但酶活性大部分得以保留。