Zhang Xiaoqing, Do My Dieu, Dean Katherine, Hoobin Pam, Burgar Iko M
Commonwealth Scientific and Industrial Research Organization Manufacturing & Materials Technology, Private Bag 33, Clayton South MDC, Clayton South, Victoria 3169, Australia.
Biomacromolecules. 2007 Feb;8(2):345-53. doi: 10.1021/bm060929x.
A series of wheat-gluten-based nanocomposites were produced by dispersing Cloisite-30B nanoclay particles into plasticized wheat gluten systems under thermal processing conditions. The exfoliation of the nanoparticles as confirmed by wide-angle X-ray diffraction and transmission electron microscopy has resulted in significant enhancement of the mechanical properties for both deamidated proteins and vital gluten systems under 50% relative humidity (RH). Such strength improvement was also pronounced for wheat gluten (WG) systems under a high humidity condition (RH = 85%). A similar level of further strength enhancement was obtained for the WG systems that had been strengthened by blending with poly(vinyl alcohol) (PVA) and cross-linking with glyoxal. Although the nanoclay modifier, a quaternary ammonium, caused an additional plasticization to the materials, the interactions between the gluten matrix and the nanoparticles were predominant in all of these nanocomposites. A solid-state NMR study indicated that the polymer matrix in all of these nanocomposites displayed a wide distribution of chain mobilities at a molecular level (less than 1 nm). The interactions between the nanoparticles and the natural polymer matrix resulted in motional restriction for all components in the mobile phases including lipid, plasticizers, and plasticized components, although no significant influence from the nanoparticles was obtained in the mobility of the rigid phases (unplasticized components). On a scale of 20-30 nm, the deamidated protein systems tended to be homogeneous. The small domain size of the matrix resulted in modifications of the spin-lattice relaxation of these systems via spin diffusion. The residual starch seemed to remain in a relatively larger domain size in WG systems. The nanoparticles could enhance the miscibility between the starch and the other components in the WG nanocomposite, but such miscibility enhancement did not occur in the WG/PVA blend and the cross-linked system. These polymer matrixes were still heterogeneous on a scale of 20-30 nm.
通过在热加工条件下将Cloisite-30B纳米粘土颗粒分散到增塑的小麦面筋体系中,制备了一系列基于小麦面筋的纳米复合材料。广角X射线衍射和透射电子显微镜证实,纳米颗粒的剥离显著提高了脱酰胺蛋白和在50%相对湿度(RH)下的活性面筋体系的机械性能。在高湿度条件(RH = 85%)下,小麦面筋(WG)体系的强度也有显著提高。通过与聚乙烯醇(PVA)共混并与乙二醛交联而增强的WG体系,也获得了类似程度的进一步强度增强。尽管纳米粘土改性剂(一种季铵盐)对材料有额外的增塑作用,但在所有这些纳米复合材料中,面筋基质与纳米颗粒之间的相互作用占主导地位。固态核磁共振研究表明,所有这些纳米复合材料中的聚合物基质在分子水平(小于1 nm)上表现出链迁移率的广泛分布。纳米颗粒与天然聚合物基质之间的相互作用导致了流动相中所有组分(包括脂质、增塑剂和增塑组分)的运动受限,尽管在刚性相(未增塑组分)的迁移率方面未观察到纳米颗粒的显著影响。在20 - 30 nm的尺度上,脱酰胺蛋白体系趋于均匀。基质的小尺寸域通过自旋扩散导致了这些体系自旋晶格弛豫的改变。在WG体系中,残留淀粉似乎保留在相对较大的域尺寸中。纳米颗粒可以增强WG纳米复合材料中淀粉与其他组分之间的混溶性,但在WG/PVA共混物和交联体系中未发生这种混溶性增强。这些聚合物基质在20 - 30 nm的尺度上仍然是不均匀的。