Beaujean Pierre-Philippe J, Mohamed Asif I, Warin Raphael
Department of Ocean Engineering, Florida Atlantic University, SeaTech Campus, 101 North Beach Road, Dania Beach, Florida 33004, USA.
J Acoust Soc Am. 2007 Jan;121(1):144-57. doi: 10.1121/1.2400616.
Acoustic communications and positioning are vital aspects of unmanned underwater vehicle operations. The usage of separate units on each vehicle has become an issue in terms of frequency bandwidth, space, power, and cost. Most vehicles rely on acoustic modems transmitting frequency-hopped multiple frequency-shift keyed sequences for command-and-control operations, which can be used to locate the vehicle with a good level of accuracy without requiring extra signal transmission. In this paper, an ultrashort baseline acoustic positioning technique has been designed, simulated, and tested to locate an acoustic modem source in three dimensions using a tetrahedral, half-wavelength acoustic antenna. The position estimation is performed using the detection sequence contained in each message, which is a series of frequency-hopped pulses. Maximum likelihood estimation of azimuth and elevation estimation is performed using a varying number of pulse and various signal-to-noise ratios. Simulated and measured position estimation error match closely, and indicate that the accuracy of this system improves dramatically as the number of pulses processed increases, given a fixed signal-to-noise ratio.
声学通信与定位是无人水下航行器作业的重要方面。在每艘航行器上使用单独的设备,在频率带宽、空间、功率和成本方面已成为一个问题。大多数航行器依靠声学调制解调器发送跳频多频移键控序列来进行指挥与控制操作,这可用于在不需要额外信号传输的情况下以较高精度定位航行器。本文设计、模拟并测试了一种超短基线声学定位技术,该技术使用四面体半波长声学天线在三维空间中定位声学调制解调器源。位置估计是利用每条消息中包含的检测序列来执行的,该检测序列是一系列跳频脉冲。利用不同数量的脉冲和各种信噪比进行方位角和仰角估计的最大似然估计。模拟和测量的位置估计误差紧密匹配,表明在给定固定信噪比的情况下,随着处理脉冲数量的增加,该系统的精度会显著提高。