Desgranges Caroline, Delhommelle Jerome
Department of Chemical Engineering, 301 South Main Street, University of South Carolina, Columbia South Carolina 29201, USA.
J Chem Phys. 2007 Feb 7;126(5):054501. doi: 10.1063/1.2431808.
Using molecular-dynamics simulations, we study the crystallization of supercooled liquids of charge-stabilized colloidal suspensions, modeled by the Yukawa (screened-Coulomb) potential. By modifying the value of the screening parameter lambda, we are able to invert the stability of the body-centered cubic (bcc) and face-centered cubic (fcc) polymorphs and study the crystal nucleation and growth in the domain of stability of each polymorph. We show that the crystallization mechanism strongly depends on the value of lambda. When bcc is the stable polymorph (lambda=3), the crystallization mechanism is straightforward. Both kinetics and thermodynamics favor the formation of the bcc particles and polymorph selection takes place early during the nucleation step. When fcc is the stable polymorph (lambda=10), the molecular mechanism is much more complex. First, kinetics favor the formation of bcc particles during the nucleation step. The growth of the post-critical nucleus proceeds through the successive cross-nucleation of the stable fcc polymorph on the metastable hcp polymorph as well as of the hcp polymorph on the fcc polymorph. As a result, polymorph selection occurs much later, i.e., during the growth step, than for lambda=3. We then extend our findings established in the case of homogeneous crystal nucleation to a situation of practical interest, i.e., when a seed of the stable polymorph is used. We demonstrate that the growth from the (111) face of a perfect fcc crystal into the melt proceeds through the same mechanisms.
我们使用分子动力学模拟,研究了由 Yukawa(屏蔽库仑)势建模的电荷稳定胶体悬浮液过冷液体的结晶过程。通过改变屏蔽参数 lambda 的值,我们能够反转体心立方(bcc)和面心立方(fcc)多晶型物的稳定性,并研究每种多晶型物稳定性范围内的晶体成核和生长。我们表明,结晶机制强烈依赖于 lambda 的值。当 bcc 是稳定的多晶型物(lambda = 3)时,结晶机制很简单。动力学和热力学都有利于 bcc 颗粒的形成,并且在成核步骤早期就发生了多晶型选择。当 fcc 是稳定的多晶型物(lambda = 10)时,分子机制要复杂得多。首先,动力学有利于在成核步骤中形成 bcc 颗粒。临界后核的生长通过稳定的 fcc 多晶型物在亚稳的 hcp 多晶型物上以及 hcp 多晶型物在 fcc 多晶型物上的连续交叉成核进行。结果,多晶型选择比 lambda = 3 时发生得晚得多,即在生长步骤中。然后,我们将在均匀晶体成核情况下建立的发现扩展到实际感兴趣的情况,即当使用稳定多晶型物的晶种时。我们证明,从完美 fcc 晶体的(111)面生长到熔体中是通过相同的机制进行的。