Suppr超能文献

使用“短纯音”作为测试信号的气导听力计设备校准的参考零点。

Reference zero for the calibration of air-conduction audiometric equipment using 'tone bursts' as test signals.

作者信息

Fedtke Thomas, Richter Utz

机构信息

Physikalisch-Technische Bundesanstalt, Braunschweig, Germany.

出版信息

Int J Audiol. 2007 Jan;46(1):1-10. doi: 10.1080/14992020601050361.

Abstract

The aim of this study was to determine reference peak-to-peak threshold sound pressure levels for air conduction sound transducers using groups of tone bursts as test signals. For this purpose, threshold measurements with five different earphones and a loudspeaker were carried out on groups of 25 young, otologically normal test subjects in the frequency range between 250 Hz and 8000 Hz, following as closely as possible the ISO Preferred Test Conditions. The dependence of the results on repetition rate, type of sound transducer, gender and age of the test subjects, and on reference pure tone thresholds was investigated. The results mainly depend on the reference equivalent sound pressure levels for pure tones of each sound transducer. Together with the results of another study carried out in Denmark, the data of the present study will form the basis for the International Standard ISO 389 Part 6 on reference hearing thresholds for acoustic test signals of short duration.

摘要

本研究的目的是确定使用成组短音突发作为测试信号时,空气传导声换能器的参考峰峰值阈值声压级。为此,在250 Hz至8000 Hz频率范围内,对25名听力正常的年轻测试对象组成的群体,使用五种不同的耳机和一个扬声器进行阈值测量,尽可能遵循ISO优选测试条件。研究了结果对重复率、声换能器类型、测试对象的性别和年龄以及参考纯音阈值的依赖性。结果主要取决于每个声换能器纯音的参考等效声压级。本研究的数据与丹麦进行的另一项研究结果一起,将构成国际标准ISO 389第6部分关于短持续时间声学测试信号参考听力阈值的基础。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验