Berge Nicole D, Reinhart Debra R, Dietz John D, Townsend Tim
Civil and Environmental Engineering Department, Tufts University, 200 College Ave., 113 Anderson Hall, Medford, MA 02155, USA.
Water Res. 2007 May;41(9):1907-14. doi: 10.1016/j.watres.2007.01.049. Epub 2007 Mar 26.
Microcosm experiments aimed at defining a rate equation that describes how different environmental conditions (i.e., gas-phase oxygen concentrations, temperature and ammonia concentration) may impact in situ ammonia removal were conducted. Results indicate that ammonia removal can readily occur at various gas-phase oxygen levels (between 0.7% and 100%) and over a range of temperatures (22, 35 and 45 degrees C). Slowest rates occurred with lower gas-phase oxygen concentrations. All rate data, except at 45 degrees C and 5% oxygen, fit well (r2=0.75) to a multiplicative Monod equation with terms describing the impact of oxygen, pH, temperature and ammonia concentration. All ammonia half-saturation values are relatively high when compared to those generally found in wastewater treatment, suggesting that the rate may be affected by the mass transfer of oxygen and/or ammonia. Additionally, as the temperature increases, the ammonia half-saturation value also increases. The multiplicative Monod model developed can be used to aid in designing and operating field-scale studies.
开展了微观世界实验,旨在确定一个速率方程,该方程描述不同环境条件(即气相氧浓度、温度和氨浓度)如何影响原位氨去除。结果表明,在各种气相氧水平(0.7%至100%之间)和一系列温度(22、35和45摄氏度)下,氨去除都很容易发生。气相氧浓度较低时,速率最慢。除了在45摄氏度和5%氧气条件下,所有速率数据都能很好地拟合(r2 = 0.75)一个乘法莫诺德方程,该方程包含描述氧气、pH值、温度和氨浓度影响的项。与废水处理中通常发现的氨半饱和值相比,所有氨半饱和值都相对较高,这表明速率可能受氧气和/或氨的传质影响。此外,随着温度升高,氨半饱和值也会增加。所开发的乘法莫诺德模型可用于辅助设计和开展现场规模研究。